Ask a Question
Coherent

Search Results

25 - 36 of 1438 Products for 'beam diameter' Page 3 of 120 |

beam diameter

Genesis CX-SLM

Genesis CX-SLM

…is available at 355, 460, 480, 488, 514, 532, and 577 nm with up to 4W of output power. The TEM 00 beam parameters remain constant from 10%-100% of the rated power including beam diameter, divergence, and M2. Mode hop-free performance is tested and recorded down to 250 mW with minimized frequency…

HYPER RAPID Lasers | Coherent

HYPER RAPID Lasers | Coherent

…nm and 1000 kHz
* Pulse on demand
* High beam quality M² >100:1 Beam Divergence, Full Angle (mrad) 85 Beam-Pointing Stability in Full PRF range (µrad / °C) <50 Electric Supply 100 to 230 VAC/50 to 60 Hz/2.5 kW 100 to 230 VAC/50 to 60 Hz/2.5 kW Beam Diameter (μm) ~3000 at 1064 nm ~3000 at 1064 nm…

FLS CL

FLS CL

…Benefits Technical features
* Beam control via optical fibers and / or conventional optics
* Unique RTPS technology
* Optical fiber beam control with up to 4 outlets, fiber diameter from 400 – 600 µm
* Integrated beam switch for Time and Energy Sharing of the optical fiber beam control
* Unique RTPS…

SLS

SLS

…Datasheet SLS Features & Benefits Technical features
* Optical fiber beam control of up to 6 outlets, fiber diameter from 50 – 600 µm
* Integrated beam switch for Time and Energy Sharing of the optical fiber beam control
* Unique RTPS technology with outstanding pulse-to-pulse stability…

HELIOS

HELIOS

…Specifications 50 kHz 125 kHz 50 kHz 125 kHz Pulse Width (FWHM) <0.79 ns <0.69 ns <0.95 ns <0.69 ns <0.85 ns Spatial Mode TEM 00 (M 2 < 1.25) Beam Diameter (Gaussian Fit, 1/e2) 3.5 mm 2.5 mm 2 mm Polarization Linear Jitter (between sequential pulses, gating mode) < ±2 ns Jitter (trigger to laser…

HighLight FL-Series Fiber Lasers | High Powered Laser | Coherent + Rofin

HighLight FL-Series Fiber Lasers | High Powered Laser | Coherent + Rofin

…version offers a separated enclosure for beam management. Up to four fibers can be used with time or energy sharing including two channel interlocks per output and a multi-station fieldbus interface. By using different diameters of the process fiber, the beam quality can be ideally adapted to the…

Collimating Units

Collimating Units

…is prealigned, water-cooled and uses synthetic fused silica lenses to preserve the quality of your beam at high power levels. Contact Us About This Product Close PRICE HERE Tech spec Optics diameter d50 mm d25 mm Focal lengths d50: 120 / 160 / 200 / 250 mm d25: 50 / 60 / 70 / 85 / 100 mm Max. power…

GeoLasHD excimer ablation laser system | Coherent

GeoLasHD excimer ablation laser system | Coherent

…Features & Benefits Model GeoLasHD Wavelength (nm) 193 Energy Density on Sample (J/cm 2) 1 - 50 Spot Diameter on Sample (µm) 2 - 160 Optical Resolution (µm) 1 Pulse Energy Stability (%, rms) 1 Beam Homogeneity (%, rms) 1 Max. Repetition Rate (Hz) 10 (opt. 100) X,Y-Drive Min. Step Size (µm) 0.1…

Focusing Units

Focusing Units

…focusing optics and beam quality. The Optoskand focusing units come either with a fixed or a z-adjustable focus position. For the z-adjustable unit the focal point position can be manually adjusted. Contact Us About This Product Close PRICE HERE Tech spec Optics diameters d50 mm d25 mm Focal lengths…

External Optics

External Optics

…fused silica optics
* Minimum focal shift
* Preserves beam quality
* Small outer dimensions
* Designed for fiber optics
* Easy to mount Collimating Units Intermediate Optics Focusing Units Process Adapters Prealigned Yes n/a Lens Diameter 25 mm & 50 mm n/a Max. Power (CW) d25: 10 kW, d50:…

StarFiber 100-600 | Coherent

StarFiber 100-600 | Coherent

…laser sources provide nominal power rates of 100 watts to 600 watts at fundamental mode beam quality. They can be operated in the pulsed and cw mode. The laser sources providing extremely small spot diameters realize welding speeds which are much higher than those of systems - at the same time there…

NA

NA

…Resonator amplifier design
* Diffraction-limited beam quality
* Unique pulse modulation
* Highly precise optical components which are fixed to a granite plate
* Laser supply based on the FLS laser series Technical Specifications
* Hole diameter: 50 - 800 µm
* Drill depth max. 2.0 mm
* Hole…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions