Ask a Question
Coherent
Search Results
1 - 12 of 36 Products for 'boresight' Page 1 of 3 |
Related Categories: Calculate Fan Angle

boresight

Properties-of-Structured-Light-Application-Note.pdf

Properties-of-Structured-Light-Application-Note.pdf

…Straig x 100. Bore-sight & Fan Angle The "curved" profile (see Figure 9) is caused by the angle between the lens and the incident beam. This curvature can be expressed as (dx/L) x 100 (see Figures 11 and 12). A general rule of thumb is: Curvature (%) = Fan Angle () x Boresight [mrad] 43751 The…

Properties-of-Structured-Light-Application-Note.pdf

Properties-of-Structured-Light-Application-Note.pdf

…Straig x 100. Bore-sight & Fan Angle The "curved" profile (see Figure 9) is caused by the angle between the lens and the incident beam. This curvature can be expressed as (dx/L) x 100 (see Figures 11 and 12). A general rule of thumb is: Curvature (%) = Fan Angle () x Boresight [mrad] 43751 The…

Laser Diode Modules

Laser Diode Modules

…range for standard options
* Largest installed base of Machine Vision Lasers
* Highest reliability and best industry warranty - 24 months.
* Uniformity – Down to +/- 1%
* Straightness = 75% of normalized intensity
* Boresight = 75% of normalized intensity Boresight <= 3 mrad, Pointing <= 10 urad/C

HYPER RAPID

HYPER RAPID

…<50 Electric Supply 100 to 230 VAC/50 to 60 Hz/2.5 kW 100 to 230 VAC/50 to 60 Hz/2.5 kW Beam Diameter (μm) ~3000 at 1064 nm ~3000 at 1064 nm Bore-Sight Accuracy ±0.5 mm and <5 mrad Warm-Up Time <40 min from chiller start High Power Industrial Picosecond Laser - The HYPER RAPID family of high power…

RAPID

RAPID

…Electric Supply 100 to 230 VAC/50 to 60 Hz Beam Diameter at 1064 nm (μm) ~1000 750 to 1200 (Laser Head Output) 1500 to 2000 (Module Output) Bore-Sight Accuracy ± 0.5 mm and <5 mrad Warm-Up Time (minutes) <40 from chiller start High-Power Industrial Picosecond Laser - The RAPID series of picosecond…

Properties-of-Structured-Light-Application-Note.pdf

Properties-of-Structured-Light-Application-Note.pdf

…Straig x 100. Bore-sight & Fan Angle The "curved" profile (see Figure 9) is caused by the angle between the lens and the incident beam. This curvature can be expressed as (dx/L) x 100 (see Figures 11 and 12). A general rule of thumb is: Curvature (%) = Fan Angle () x Boresight [mrad] 43751 The…

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…unlike conventional crosshairs that are formed either by using two lasers or by splitting and recombining one beam to form a cross. 4 Define boresight method. Reverse TTL Modulation Vmod (V) 0 1 2 3 4 5 Direct TTL Modulation OpticalPower Transitional states Reverse Linear Modulation Vmod (V)…

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…unlike conventional crosshairs that are formed either by using two lasers or by splitting and recombining one beam to form a cross. 4 Define boresight method. Reverse TTL Modulation Vmod (V) 0 1 2 3 4 5 Direct TTL Modulation OpticalPower Transitional states Reverse Linear Modulation Vmod (V)…

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…unlike conventional crosshairs that are formed either by using two lasers or by splitting and recombining one beam to form a cross. 4 Define boresight method. Reverse TTL Modulation Vmod (V) 0 1 2 3 4 5 Direct TTL Modulation OpticalPower Transitional states Reverse Linear Modulation Vmod (V)…

HYPERRAPID100 DS 0414 5.pdf

HYPERRAPID100 DS 0414 5.pdf

…85 Beam-Pointing Stability in Full PRF Range (rad/°C) <50 Electric Supply1 100 to 230 VAC/50 to 60 Hz/3.6 kW Beam Diameter (m) ~3000 at 1064 nm Bore-Sight Accuracy ±0.5 mm and <5 mrad Warm-Up Time (minutes) <40 from chiller start Repetition Rate (kHz) Average Power (W) No AOM process shutter With…

Talisker-Ultra-1064-16-Short-Head-Data-Sheet.pdf

Talisker-Ultra-1064-16-Short-Head-Data-Sheet.pdf

…to 200 with burst control Pulse Width (ps) 100:1 horizontal Spatial Mode TEM00 (M2 85 Warm-up Time (typical) <60 minutes from cold start Bore-sight Accuracy Lateral <1 mm from window center Angular ±5 milli-radians Pointing Stability Angular3 (typical) <10 micro-radians per degree centigrade…

HYPERRAPID100 DS 0414 5.pdf

HYPERRAPID100 DS 0414 5.pdf

…85 Beam-Pointing Stability in Full PRF Range (rad/°C) <50 Electric Supply1 100 to 230 VAC/50 to 60 Hz/3.6 kW Beam Diameter (m) ~3000 at 1064 nm Bore-Sight Accuracy ±0.5 mm and <5 mrad Warm-Up Time (minutes) <40 from chiller start Repetition Rate (kHz) Average Power (W) No AOM process shutter With…

Powered by Site Search powered by SLI Systems

Call 1-800-227-8840


Outside the U.S. 1-408-764-4983

Coherent has locations across the globe that are available to provide support for any product, service or inquiry.

Visit our Contact Page to connect with any of our global sites.


Corporate Headquarters
Coherent Inc.
5100 Patrick Henry Drive
Santa Clara, CA 95054 USA

email: tech.sales@coherent.com

Send Us a Message

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions