... CW laser calibrations were not available from N.I.S.T. To achieve accurate calibrations traceable to fundamental units, a new type of flowing water calorimeter (FWC) was constructed in which the laser absorbing element was the central assembly from a water-cooled PowerMax® PM3K thermopile type probe ... Related Searches:response time | optical power meter
User Manual PM-Digital Power Digitizer User Manual PM-Digital Power Digitizer 7470 SW Bridgeport Rd. Portland, OR 97224 PM-Digital User Manual ii This document is copyrighted with all rights reserved. Under the copyright laws, this document may not be copied in whole or in part or reproduced in any ... Related Searches:db25 | pm digital | pm-5200
Published in the Proceedings of the 2001 Space Terahertz Technology Symposium. WIDELY-TUNABLE LASERSIDEBAND THz SOURCE FOR SPECTROSCOPY & LO APPLICATIONS Eric R. Mueller DeMaria ElectroOptics Systems, Inc. 1280 Blue Hills Ave. Bloomfield, CT 06002 (806) 243-9557 Jeffrey L. Hesler, Thomas W. Crowe ... Related Searches:thz laser | tunable laser
Published in the Proceedings of the 2001 Space Terahertz Technology Symposium. WIDELY-TUNABLE LASERSIDEBAND THz SOURCE FOR SPECTROSCOPY & LO APPLICATIONS Eric R. Mueller DeMaria ElectroOptics Systems, Inc. 1280 Blue Hills Ave. Bloomfield, CT 06002 (806) 243-9557 Jeffrey L. Hesler, Thomas W. Crowe ... Related Searches:tunable laser | thz laser | bloomfield ct
... and then an attenuator was added to keep the THz power at the diode in the 3-10 mW range. The laser output powers were measured with a Scientech calorimeter and then calibration corrected.7 The results of the THz measurements are presented in Figure 14. The "Normalized Response" data were ...
... sensor voltage 7 times per second, and every 64 readings it takes a reading of the sensor head temperature. For some applications, such as using the calorimeter sensors to measure single pulse energies, it may be desired to take continuous readings of the sensor output without interruption for head ...
... and then an attenuator was added to keep the THz power at the diode in the 3-10 mW range. The laser output powers were measured with a Scientech calorimeter and then calibration corrected.7 The results of the THz measurements are presented in Figure 14. The "Normalized Response" data were ...