Ask a Question
Coherent
Search Results
25 - 36 of 54 Products for 'carbon monoxide laser' Page 3 of 5 |

carbon monoxide laser

Diamond J-3-5 COlaser DS 0716revA 1.pdf

Diamond J-3-5 COlaser DS 0716revA 1.pdf

…Henry Drive Santa Clara, CA 95054 phone (800) 527-3786 (408) 764-4983 fax (408) 764-4646 e-mail tech.sales@Coherent.com Printed in the U.S.A. MC-007-16-0M0716Rev.A Copyright ©2016 Coherent, Inc. Front View Top View Side View BottomView Fully Sealed Carbon Monoxide Laser Diamond J-3-5 CO Laser

Microsoft Word - Document1

Microsoft Word - Document1

…different laser technologies we specialise in, including excimer, nanosecond, picosecond, fibre, direct-diode, carbon dioxide and carbon monoxide lasers. Our vertical integration means we can support each application at the level required by the customer, whether that's a laser, laser and scanning…

Microsoft Word - Document1

Microsoft Word - Document1

…different laser technologies we specialise in, including excimer, nanosecond, picosecond, fibre, direct-diode, carbon dioxide and carbon monoxide lasers. Our vertical integration means we can support each application at the level required by the customer, whether that's a laser, laser and scanning…

COHR MaterialsProcessingBrochure 0816revA 3.pdf

COHR MaterialsProcessingBrochure 0816revA 3.pdf

…superior reliability of Diamond C-Series and GEM-Series lasers result in very low cost of ownership, making them the laser of choice in the most demanding industrial applications. Coherent's new generation of carbon monoxide (CO) lasers offer enhanced processing characteristics for materials…

COHR MaterialsProcessingBrochure 0816revA 3.pdf

COHR MaterialsProcessingBrochure 0816revA 3.pdf

…superior reliability of Diamond C-Series and GEM-Series lasers result in very low cost of ownership, making them the laser of choice in the most demanding industrial applications. Coherent's new generation of carbon monoxide (CO) lasers offer enhanced processing characteristics for materials…

CO Lasers from Lab to Fab

CO Lasers from Lab to Fab

…Sources Laser Technik Journal 3/2016 15 CO Lasers from Lab to Fab Developments in CO laser technology enable the production of robust CO lasers that offer benefits in glass cutting applications Andrew Held First demonstrated over fifty years ago, carbon monoxide (CO) and carbon dioxide (CO2) lasers

CO Lasers from Lab to Fab

CO Lasers from Lab to Fab

…Sources Laser Technik Journal 3/2016 15 CO Lasers from Lab to Fab Developments in CO laser technology enable the production of robust CO lasers that offer benefits in glass cutting applications Andrew Held First demonstrated over fifty years ago, carbon monoxide (CO) and carbon dioxide (CO2) lasers

Ahead the New Glass Cutting COHR Rofin Whitepaper.pdf

Ahead the New Glass Cutting COHR Rofin Whitepaper.pdf

…and CO Lasers Carbon dioxide (CO2) lasers have been used in glass cutting for many years. In contrast, carbon monoxide (CO) lasers, which were first introduced as practical, industrial tools by Coherent in 2015, are just beginning to be deployed in this application. Both CO2 and CO lasers offer…

Ahead the New Glass Cutting COHR Rofin Whitepaper.pdf

Ahead the New Glass Cutting COHR Rofin Whitepaper.pdf

…and CO Lasers Carbon dioxide (CO2) lasers have been used in glass cutting for many years. In contrast, carbon monoxide (CO) lasers, which were first introduced as practical, industrial tools by Coherent in 2015, are just beginning to be deployed in this application. Both CO2 and CO lasers offer…

The PCB Magazine, November 2015

The PCB Magazine, November 2015

…As a result, the practical lower limit on via diameters for CO2 lasers is about 70 µm. But what if the hole diameter needs to be smaller than 70 µm? Co Lasers This is where carbon monoxide (CO) lasers come in. This type of laser was first developed about 50 years ago, but lifetime and reliability…

The PCB Magazine, November 2015

The PCB Magazine, November 2015

…As a result, the practical lower limit on via diameters for CO2 lasers is about 70 µm. But what if the hole diameter needs to be smaller than 70 µm? Co Lasers This is where carbon monoxide (CO) lasers come in. This type of laser was first developed about 50 years ago, but lifetime and reliability…

The PCB Magazine, November 2015

The PCB Magazine, November 2015

…As a result, the practical lower limit on via diameters for CO2 lasers is about 70 µm. But what if the hole diameter needs to be smaller than 70 µm? Co Lasers This is where carbon monoxide (CO) lasers come in. This type of laser was first developed about 50 years ago, but lifetime and reliability…

Powered by Site Search powered by SLI Systems

Call 1-800-227-8840


Outside the U.S. 1-408-764-4983

Coherent has locations across the globe that are available to provide support for any product, service or inquiry.

Visit our Contact Page to connect with any of our global sites.


Corporate Headquarters
Coherent Inc.
5100 Patrick Henry Drive
Santa Clara, CA 95054 USA

email: tech.sales@coherent.com

Send Us a Message

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions