Ask a Question
Coherent

Search Results

1 - 6 of 6 Products for 'chiller' Page 1 of 1 |
  • 1

chiller

HYPER RAPID Lasers | Coherent

HYPER RAPID Lasers | Coherent

…230 VAC/50 to 60 Hz/2.5 kW Beam Diameter (μm) ~3000 at 1064 nm ~3000 at 1064 nm Bore-Sight Accuracy ±0.5 mm and <5 mrad Warm-Up Time <40 min from chiller start High Power Industrial Picosecond Laser - The HYPER RAPID family of high power industrial picosecond lasers is the higher power version of…

HyperRapid NX - Industrial Picosecond Laser

HyperRapid NX - Industrial Picosecond Laser

…head is a self-contained system where all optical elements, control electronics, and thermo-mechanical management are integrated. It complies with state-of-the-art safety regulation and it is complemented by a selection of off-the-shelf chillers and power supplies to offer the greatest flexibility.

SUPER RAPID-HE Lasers | Coherent

SUPER RAPID-HE Lasers | Coherent

…M² >100:1 Electric Supply 100 to 230V, 50/60 Hz, 2 kW Control Unit (W x D x H; weight) 555 x 600 x 685 mm³; 108 kg Warm-Up Time (minutes) <40 from chiller start Industrial, High Repetition Rate Picosecond Laser - The SUPER RAPID series of picosecond lasers is designed for industrial microprocessing.…

RAPID Laser | Coherent

RAPID Laser | Coherent

…(μm) ~1000 750 to 1200 (Laser Head Output) 1500 to 2000 (Module Output) Bore-Sight Accuracy ± 0.5 mm and <5 mrad Warm-Up Time (minutes) <40 from chiller start High-Power Industrial Picosecond Laser - The RAPID series of picosecond lasers are designed for industrial microprocessing. They offer a new…

RAPID FX

RAPID FX

…Voltage [100 - 265] VAC Power Consumption <1500W Temperature (non-condensing) - Laser Head +15 to 30°C (59 to 86°F) Temperature (non-condensing) - Chiller +15 to 30°C (59 to 86°F) Vibration <0.15 g Temperature -10 to +50°C (-14 to 122°F) Temperature Gradient 15°C (59°F) per hour Relative Humidity 5%…

Laser Marking Workstations

Laser Marking Workstations

…module (oscillating table configuration only)
* Digital readout, motorized or programmable upgrade of Z-Axis
* Refrigerated recirculating water chiller for all LME-RM versions (laser dependent)
* Automated Pick ‘N Place parts handling
* Custom Motion Control ability
* Fume extractor, available for…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions