Ask a Question
Coherent

Search Results

1 - 12 of 871 Products for 'chiller' Page 1 of 73 |

chiller

Paladin Advanced Preinstallation.book

Paladin Advanced Preinstallation.book

…from the chiller. Figure 3-16 shows the connections on the back of the laser head and chiller. Activate the chiller query with the service command "CH=1" (see Table 6-3 on page 6-5) Active Chiller Control The Paladin chiller is preset for "active chiller". "Active chiller" enables the chiller to get…

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

Description and Specifications 2 - 13 Figure 2-4. Termotek Chiller P307-16273 (for 16W-35W Systems) (Continued) 440

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

Installation 3 - 7 DANGER! Keep power cord to the chiller disconnected when you fill the chiller to prevent electrical shock. Termotek Model Figure 3-5. Chiller Voltage Selection Terminal with Voltage Selection Plugs Opening in Chiller - Voltage Selection Terminal Voltage Selection Plugs (2) -…

HighLight-D-Series-Data-Sheet.pdf

HighLight-D-Series-Data-Sheet.pdf

…Power Stability (%/hour) 16/14 >14/12 >10/10 Chiller Water Temp. (°C) 25/25 ±1 Chiller Flow Rate (l/min.) 42/42 39/39 20/20 Chiller Water Pressure (psi) 65/50 Chiller Operating Voltage (VAC) 400/460 (±10%) Chiller Operating Frequency (Hz) 50/60 Chiller Max. Current Draw (A) 29 29 25 Environmental…

MetaBEAM1000c Pre.book

MetaBEAM1000c Pre.book

…NOTICE! The chiller temperature should never be set below the ambient dew point. Operating in this condition can cause condensation that will permanently damage the laser tube. Damage caused by condensation is not covered under warranty. Table 1-4. Chiller Requirements CHILLER COOLING CAPACITY…

HYPER RAPID Lasers | Coherent

HYPER RAPID Lasers | Coherent

…230 VAC/50 to 60 Hz/2.5 kW Beam Diameter (μm) ~3000 at 1064 nm ~3000 at 1064 nm Bore-Sight Accuracy ±0.5 mm and <5 mrad Warm-Up Time <40 min from chiller start High Power Industrial Picosecond Laser - The HYPER RAPID family of high power industrial picosecond lasers is the higher power version of…

HyperRapid NX - Industrial Picosecond Laser

HyperRapid NX - Industrial Picosecond Laser

…head is a self-contained system where all optical elements, control electronics, and thermo-mechanical management are integrated. It complies with state-of-the-art safety regulation and it is complemented by a selection of off-the-shelf chillers and power supplies to offer the greatest flexibility.

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

Description and Specifications 2 - 13 Figure 2-4. Termotek Chiller P307-16273 (for 16W-35W Systems) (Continued) 440

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

…Laser Preinstallation Manual 3 - 28 Chiller Option 1. Remove the 4-cap screws and remove the lock washers from position C on both sides of the chiller (see Figure 3-21). 2. Set the two Bracket Mount 19 Chillers into position C. Secure Bracket Mount 19 Chiller with the 4-countersunk screws, DIN 965…

SUPER RAPID-HE Lasers | Coherent

SUPER RAPID-HE Lasers | Coherent

…M² >100:1 Electric Supply 100 to 230V, 50/60 Hz, 2 kW Control Unit (W x D x H; weight) 555 x 600 x 685 mm³; 108 kg Warm-Up Time (minutes) <40 from chiller start Industrial, High Repetition Rate Picosecond Laser - The SUPER RAPID series of picosecond lasers is designed for industrial microprocessing.…

RAPID Laser | Coherent

RAPID Laser | Coherent

…(μm) ~1000 750 to 1200 (Laser Head Output) 1500 to 2000 (Module Output) Bore-Sight Accuracy ± 0.5 mm and <5 mrad Warm-Up Time (minutes) <40 from chiller start High-Power Industrial Picosecond Laser - The RAPID series of picosecond lasers are designed for industrial microprocessing. They offer a new…

RAPID FX

RAPID FX

…Voltage [100 - 265] VAC Power Consumption <1500W Temperature (non-condensing) - Laser Head +15 to 30°C (59 to 86°F) Temperature (non-condensing) - Chiller +15 to 30°C (59 to 86°F) Vibration <0.15 g Temperature -10 to +50°C (-14 to 122°F) Temperature Gradient 15°C (59°F) per hour Relative Humidity 5%…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions