1 - 10 of 41 Search Results for circular polarizer
|
|
|
2.
Accessories for Diode Lasers
|
|
... and pumping applications. A proprietary aiming module, showing the laser beam's path and focus, can be used with the imaging modules. In addition, a circular polarizer is available for use with full-feature systems. Cladding Nozzle Diode laser cladding produces high quality coatings. Circular Polarizing ...
Related Searches: fiber taper | oia | jumper
|
|
|
|
|
3.
Dieboard Cutting with CO 2 lasers
|
|
... charring on the cut surface. Laser Used: K-Series 10-Micron Process: The beam from a Coherent K-500 laser was sent through an optical isolator and a circular polarizer before being focused by a 127-mm focal length lens in a Coherent gas-jet cutting assembly. This produced a theoretical spot size of ...
Related Searches: k500 | cutting
|
|
|
|
5.
cqeofiDS
|
Best match in this PDF
|
All matches in this PDF
|
... quality of metals and non-metals. Method of Operation of the CQE Due to the design of CO2 laser resonators the laser beam generated is linearly polarized. Linearly polarized light is often not useful for materials processing. For example, linear polarization causes a "saw-tooth" pattern when ...
Related Searches: cqe | polarizer | co2 laser price
|
|
|
|
6.
cqeofiDS
(PAGE 2 OF 2)
|
|
|
... +31 (30) 280 6060 France +33 (1) 6985 5145 Germany +49 (6071) 9680 UK +44 (1223) 228 800 CQE, OFI Accessories D I A M O N D CO2 Laser Technology TM CIRCULAR POLARIZER (CQE) OPTICAL FEEDBACK ISOLATOR (OFI)
|
|
|
|
|
7.
Alumina Drilling and Scribing with CO 2 Lasers
|
|
... -Series 10-Micron Process: The output beam from a Coherent K-250 CO 2 laser operating at 10.6 µm was directed into an optical isolator and through a circular polarizer. The beam was then sent through a 2.5" (63 mm) focal length lens in a Coherent cutting assembly. The calculated focal spot size ...
Related Searches: diamond k-250 | laser engraving | k250
|
|
|
|
|
9.
Thin-Film Thermoplastic Cutting with a 150-W CO 2 Laser
|
|
... beam from a Coherent G-150 CO 2 laser, operating at 150W at 10.6-µm, was sent through a cylindrical correcting lens, an optical isolator and a circular polarizer. A beam expander was then used to transform the beam to a 16-mm diameter. A 63-mm focal length focusing lens, mounted in a Coherent gas-jet ...
Related Searches: diamond | laser engraving | 150
|
|
|
|
|
10.
Ceramic Scribing with the G-150 laser
|
|
... : G-Series Process: In these tests, the beam from a Coherent G-150 laser was sent through a cylindrical correcting lens, an optical isolator and a circular polarizer before being expanded by a 2X Keplerian telescope. The beam was then directed through a 63-mm focal length lens, with a calculated spot ...
Related Searches: scribing | g-150 | laser engraving | 150
|
|