Search Results

25 - 36 of 78 Products for 'collimator' Page 3 of 7 |
Related Categories: 10 Kw | Qbh Connector | Llk-d | Optoskand | Hlc-8

collimator

COHR HighLightFL Standard FFC DS 0818.pdf

COHR HighLightFL Standard FFC DS 0818.pdf

…FFC Datasheet
SPECIFICATIONS HighLight FL6000
Nominal Power (W) 6000
Power Range (%) 10 - 100
Laser Beam Quality (BPP) at Collimator 3 mm x mrad BPP 4 mm x mrad for 100 µm fiber (other fiber diameter on request)
Power Stability (%) ± 2
Pulse Frequency Range CW - 5 kHz…

COHR HighLightFL1000P DS 0617.pdf

COHR HighLightFL1000P DS 0617.pdf

…PRELIMINARY Technical Data
HighLight FL1000P Pulsed Yb:YAG Fiber Laser
Nominal Power (W) 1000
Laser Beam Quality (BPP) at Collimator <24 mm x mrad for 400 m round fiber core;
<35 mm x mrad for 400 m square fiber core
Pulse Frequency Range (kHz) Standard:…

Coherent Magnum II Laser Operator's Manual

Coherent Magnum II Laser Operator's Manual


follow these instructions:
1. Loosen the locking screw. This will release the pressure on the
focusing optics, allowing the collimator to be moved.
2. Turn the focus adjustment screw clockwise or counterclockwise to obtain the desired focus at your working distance.

COHR HighLightFL Compact SingleMode DS 0818.pdf

COHR HighLightFL Compact SingleMode DS 0818.pdf


HighLight
FL2500CSM
Nominal Power (W) 500 750 1000 1500 2000 2500
Power Range (%) 10 to 100
Laser Beam Quality (BPP) at Collimator 0.4 mm x mrad
Power Stability (%) ± 2
Pulse Frequency Range CW - 5 kHz
Wavelength (nm) 1070 ± 10
ELECTRICAL RATINGS

COHR HighLightFL Standard FFS DS 0818.pdf

COHR HighLightFL Standard FFS DS 0818.pdf

…FL3000 HighLight FL4000 HighLight FL5000
Nominal Power (W) 3000 4000 5000
Power Range (%) 10 to 100
Laser Beam Quality (BPP) at Collimator 3 mm x mrad BPP 4 mm x mrad for 100 µm fiber
Power Stability (%) ± 2
Pulse Frequency Range CW to 5 kHz
Wavelength (nm) 1070 ± 10…

Coherent BioRay Operator's Manual

Coherent BioRay Operator's Manual

…Loosen the collimating lens setscrew on the laser.
5. Make sure the four screws holding the SMA mount to the
dovetail are lightly seated (minimal pressure applied)--the
SMA mount needs to be able to move relative to the dovetail
to peak coupling efficiency.
Collimating Lens…

ModeMaster PC User Manual

ModeMaster PC User Manual

…Panel
contains an item to reset the Maximum indicator as needed.
Laser Diode
Collimation
Process
The ModeMaster PC is one of the most powerful and easy to use
Laser Diode collimation tools available. Based on the current wavelength setting, ModeMaster PC knows the exact…

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

…MX 639-1000
Wavelength (nm) 607 ±1 639.5 ±1
Output Power (mW) 500 1000
Spatial Mode TEM00
Bandwidth (nm) <0.5
Collimated Version
Beam Waist Diameter2 (1/e2, mm) 1.0
Beam Divergence2 (1/e2, mrad) 1.5
Beam Waist Location2 (m) 0.25
M2
Horizontal…

Book.book

Book.book


· Heat sink (optional)
Laser Head The CUBE laser system is a direct-emitting semiconductor laser.
The output beam of the diode is collimated by a high-aperture lens.
Additionally, the beam is formed by a prism pair to achieve a round
beam in the far field. A thermoelectric…

COHR StingRay BioRay DS 0618 3.pdf

COHR StingRay BioRay DS 0618 3.pdf

…mount, 1 meter cable and Hirose connector, typical 1x3 mm collimated beam
1264214 BioRay 450 nm 50 mW Elliptical Dot Laser
Analog Modulation enabled, Includes mount, 1 meter cable and Hirose connector, typical 1x3 mm collimated beam
1270002 BioRay 488 nm 20 mW Elliptical Dot Laser…

Properties-of-Structured-Light-Application-Note.pdf

Properties-of-Structured-Light-Application-Note.pdf

…given working distance. The input beam
diameter can be changed by the divergence of the diode or the focal length of the collimator. Coherent has
optional collimators that can be selected to produce thinner lines for more demanding applications.
EFL (mm)
WD
(mm)
4.5 6 8…

x lase A4 4s 02 2013 lr 1 .pdf

x lase A4 4s 02 2013 lr 1 .pdf

…TRANSPARENT MATERIALS
SPECIFICATIONS
CONTROL, LASER AND COOLING UNIT:
Average power (measured at collimated beam): 24 W (max)
Pulse energy (measured at collimated beam): 6 J (max)
Average pulse energy stability: < 5% (measured over 12 hours)
Pulse width: 20-30 ps,…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions