---

1.    Laser_Cooling_Water_Guidelines Best match in this PDF  |  All matches in this PDF Laser Cooling Water Guidelines for Innova® Ion Laser Systems 5100 Patrick Henry Drive Santa Clara, CA 95054 Innova Ion Laser Systems ii This document is copyrighted with all rights reserved. Under the copyright laws, this document may not be copied in whole or in part or reproduced in any other media ... Related Searches: laserpure 40 | laserpure | chiller | water chiller

2.    Diamond_C70L_DS_4 Best match in this PDF  |  All matches in this PDF ... 10X M4 11.4 mm (0.5 in.) Both Sides 40 mm (1.6 in.)20 mm (0.8 in.) 63.6 mm (2.5 in.) 17.7 mm (0.7 in.) Grounding Post Control Connector VDC Power In Coolant Supply Ø 6mm OD Coolant Supply Ø 6mm OD RJ45 DIAMOND C-70L Liquid-Cooled RF-Excited OEM Industrial CO2 Laser Features · Ultra-compact · Circular ...

3.    G-100iBrochure Best match in this PDF  |  All matches in this PDF ... inlet cooling water temperature of 25°C. Allow a 1%/°C of power de-rating for inlet cooling water to a maximum temperature of 35°C. 2 At a constant coolant temperature. Stability defined as ±(Pmax-Pmin)/2Pmin from cold start at 25°C. 3 Full angle with a ±5°C water temperature change. 4 Without beam ... Related Searches: g 100i | slab technology

4.    Diamond_C30L_DS_4 Best match in this PDF  |  All matches in this PDF ... ) 306.7 mm (12.1 in.) 394.4 mm (15.5 in.) 357 mm (14.1 in.) 10X M4 11.4 mm (0.5 in.) Both Ends 4X M4 15.2 mm (0.6 in.) Control Connector VDC Power In Coolant Supply Ø 6mm OD Coolant Return Ø 6mm OD RJ45 DIAMOND C-30L Liquid-Cooled RF-Excited OEM Industrial CO2 Laser Features · Ultra-compact · Outstanding ... Related Searches: diamond

5.    Diamond_E-400_Preinstallation_RevAA  (PAGE 29 OF 31) ... the purge gas tubing to the laser head. Cooling fluid inlet Connection for the 3/8 inch I.D. nylon reinforced PVC cooling fluid hose that supplies coolant from the coolant source. Cooling fluid outlet Connection for the 3/8 inch I.D. nylon reinforced PVC cooling fluid hose. Cooling fluid travels from ...

6.    Diamond_E-400_Preinstallation_RevAA  (PAGE 30 OF 31) Diamond E-400 Preinstallation Manual 24 The cooling fluid source should be a closed-loop cooling system. Coolant composition should meet the requirements stated in the paragraph titled "Coolant Composition" on page 2. Refer to in the paragraphs titled "Cooling" on page 1 and " ...

7.    LaserGlassCuttingInFlatPanelDisplayProduction  (PAGE 2 OF 4) Focused laser beam Direction of glass motion Coolant nozzle Scribe Heated area Cooled area ken. The latter factor is especially important in screens that double as touchpads. The laser edge The traditional technique for cutting glass, in use in various forms literally for centuries, involves scribing ... Related Searches: glass cutting

8.    LaserGlassCuttingInFlatPanelDisplayProduction  (PAGE 3 OF 4) ... cutting, and which produces superior results for thin substrates," notes Christoph Hermanns, executive VP. "In particular, delivery of the coolant was an area of significant focus. We studied the effects of various gases and liquids, and developed new technology for spray nozzles that deliver ... Related Searches: glass cutting

9.    Shareholdermeeting2008final  (PAGE 15 OF 20) ... & LED On/Off Indicator RF Supply Control Access RF/Laser Interface Connection System Control Connectors LED Status Indicators Purge Inlet Coolant Inlet Coolant Outlet Recent Product Introduction: DIAMOND E-400 (External Views)

10.    DIAMOND_brochure  (PAGE 6 OF 11) ... the most demanding applications. QS Head Block DIAMOND Output Shutter Q-Switch-Timing Electronics Mounting Foot System Housing Output Optics Liquid-Coolant Ports (Hidden) RF Input Connector Reflective Polarization Rotator (RPR) EO Q-Switch (Hidden) RF Matching Network Sealed-Off, RF-Excited, Folded ... Related Searches: gem 100

---

Search Suggestions: water chiller | c-70l | g 100i | diamond | laserpure 40 | laserpure | chiller | laserpure 20 | water cooling | heat exchanger

Page 1 2 3 4 5 6 7 8 9 of 9 | Next

Site Search by

Coherent Contact Information