1 - 10 of 122 Search Results for deionized
|
|
|
5.
00_E-1000_PreInst.book
(PAGE 18 OF 95)
|
|
DIAMOND E-1000 Series OEM Lasers Preinstallation Manual
10
Coolant Composition The recommended coolant composition is a mixture of clean
distilled or de-ionized water and OPTISHIELD® Plus, a low
toxicity, corrosion inhibitor. OPTISHIELD Plus is available from
OptiTemp, Inc.…
Related Searches: optishield
|
|
|
|
|
6.
00_E-400_Series_Preinstall.book
(PAGE 16 OF 55)
|
|
Diamond E-400 Series OEM Lasers Preinstallation Manual
8
Coolant Temperature At the laser head, the inlet temperature of the cooling fluid should
always be above the dew point to prevent condensation from developing inside the laser head or RF power module.
Coolant Filtering To…
|
|
|
|
|
7.
00_E-400_Preinstall.book
(PAGE 8 OF 39)
|
|
…to the laser head and the RF power supply,
never operate the E-400 liquid cooled laser using only ordinary
water, such as tap water or deionized water, as a coolant. The
laser contains materials which will suffer corrosion damage
when exposed to plain water without corrosion inhibitors…
Related Searches: optishield
|
|
|
|
|
8.
00_HighLight_4000_Pre.book
(PAGE 15 OF 83)
|
|
Description and Specifications
7
During operation, the chiller circulates filtered de-ionized water
maintained at a constant temperature. Chiller controls consist of a
main power switch (electrical disconnect), an on/off/remote switch,
and a fault indicator. The chiller…
Related Searches: chiller
|
|
|
|
|
9.
00_E-400_Preinstall.book
(PAGE 8 OF 39)
|
|
…to the laser head and the RF power supply,
never operate the E-400 liquid cooled laser using only ordinary
water, such as tap water or deionized water, as a coolant. The
laser contains materials which will suffer corrosion damage
when exposed to plain water without corrosion inhibitors…
Related Searches: optishield
|
|
|
|
|
10.
00_HighLight_4000_Pre.book
(PAGE 15 OF 83)
|
|
Description and Specifications
7
During operation, the chiller circulates filtered de-ionized water
maintained at a constant temperature. Chiller controls consist of a
main power switch (electrical disconnect), an on/off/remote switch,
and a fault indicator. The chiller…
|
|
