Ask a Question
Coherent

Search Results

13 - 24 of 885 Products for 'detector' Page 2 of 74 |
Related Categories: Op 2 Vis | Op-2 Ir | Lm-2 Vis | Op 2 Ir | Op-2 Vis

detector

Mira Family

Mira Family

…Optima System Ease of use and reliability are enhanced by the Optima system used on the Mira Optima 900 lasers. This is a series of on-board detectors whose signals are diagnosed by the laser control unit, facilitating daily operation, performance optimization and alignment procedures.…

YAG/Harmonics and IR Sensors

YAG/Harmonics and IR Sensors

…that work either throughout the visible and near-IR, or throughout the near-IR and mid-IR, without the need to change diffusers. Both these detectors mate Coherent’s unique MaxBlack coating with a novel diffuser to produce superior damage resistance characteristics. This enables operation with…

Mira 900

Mira 900

…enables easy adjustment of the output wavelength, pulse width and power. Optima features a fast photodiode, relative power monitor, ß-lock, CW detector, humidity sensor and an automatic starter. A wide range of accessories is available for the Mira-900. These allow operation at lower repetition-rate…

High-Sensitivity Thermopile Sensors 2W

High-Sensitivity Thermopile Sensors 2W

…and a large active area. These sensors are ideal for measuring small laser diodes and HeNe lasers and small ion lasers. Unlike semiconductor detectors, these sensors have a flat broadband output and will not saturate above 1 mW/cm2. More Information The PS10 model includes a light tube mounted…

Large Area High Power Water-Cooled Thermopile Sensors 5kW

Large Area High Power Water-Cooled Thermopile Sensors 5kW

…in a 100 mm diameter size, and are also useful for diode bars and large cross-section laser beams. The PM5K-200 features a 200 mm diameter detector, and is specifically intended to measure the power output of large laser diode bar arrays. Drawing Packages Click the links below to download…

kW PowerMax Pro Sensor

kW PowerMax Pro Sensor

…less than 100 microseconds with no overshoot. This capability provides nearly instantaneous high power measurement. In traditional kW thermopile detectors, heat is generated in the absorbing coating when it is struck by the laser. The heat must then move through the thick copper substrate out to the…

Life Sciences and Medical Applications

Life Sciences and Medical Applications

…short focal plane of the objective lens (as small as .5 microns). Any image data above or below the focal plane is prevented from reaching the detector. Levels of the sample are collected as the focal plane (Z axis) is raised or lowered. These levels are then computer-assembled into a three…

ModeMaster PC User Manual

ModeMaster PC User Manual

ModeMaster PC User Manual 1 - 24 Detector Change 1. Select Head from the Setup menu. The detector changing process can also be accessed from the Wavelength Setup Dialog.

ModeMaster PC User Manual

ModeMaster PC User Manual

…Select Change Detector from the Head Setup dialog. The current lens and detector are displayed in this dialog. 3. When you click on the change detector button, a selection dialog will appear. Click on the drop down arrow to view the list of available detectors. Select the desired detector from the…

ModeMaster PC User Manual

ModeMaster PC User Manual

ModeMaster PC User Manual 1 - 24 Detector Change 1. Select Head from the Setup menu. The detector changing process can also be accessed from the Wavelength Setup Dialog.

ModeMaster PC User Manual

ModeMaster PC User Manual

…Select Change Detector from the Head Setup dialog. The current lens and detector are displayed in this dialog. 3. When you click on the change detector button, a selection dialog will appear. Click on the drop down arrow to view the list of available detectors. Select the desired detector from the…

ModeMaster PC User Manual

ModeMaster PC User Manual

ModeMaster PC User Manual 1 - 24 Detector Change 1. Select Head from the Setup menu. The detector changing process can also be accessed from the Wavelength Setup Dialog.

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions