Ask a Question
Coherent

Search Results

1 - 12 of 97 Products for 'diamond e 400' Page 1 of 9 |
Related Categories: Diamond | Gem Series | Products | C Series | Laser

diamond e 400

CO₂ and CO Lasers

CO₂ and CO Lasers

…mechanical design expertise. Contact Us About This Product Close All CO₂ and CO Lasers Products DIAMOND J-Series DC Series DIAMOND C-Series and Cx-Series CO Laser - 5µm DIAMOND E-Series DIAMOND GEM-Series CO₂ and CO Lasers Literature Brochure: Lasers for Materials Processing Call…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

Diamond E-400 Series OEM Lasers Preinstallation Manual 26 6. Two people are required to carefully lift the wooden side panels up and over, exposing the system (Figure 12). 7. Cut the tape securing the top end of the user documents bag from the laser moisture seal bag (Figure 13). Figure 12. E-400…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

Diamond E-400 Series OEM Lasers Preinstallation Manual 10 Freeze/Burst Protection The recommended coolant mixture does not provide freeze protection; therefore the coolant temperature must be maintained above the freezing point of water. Since lower temperatures may occur during shipment and…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

Diamond E-400 Series OEM Lasers Preinstallation Manual 22 Facility Preparation Prepare the facility (installation site) as described in Table 1 on page 2. Unpacking and Inspection The E-400 Series laser system packaging has been designed for robust shipment. Upon receiving the system, inspect the…

(No Title Available)

(No Title Available)

…just to name a few. Data Sheet Monaco 1035 DIAMOND J-Series The J-Series CO 2 lasers, built on a common platform, pack a host of high performance features ideal for high demanding materials processing applications. Data Sheet Diamond J-2 Series DIAMOND C-Series and Cx-Series C-Series and Cx-Series…

250 kHz Ultrafast Amplifiers

250 kHz Ultrafast Amplifiers

…NX Chameleon Discovery Vitara Paladin Advanced 532 META 1.5C DIAMOND J-Series HyperRapid NX HighLight FL-1000P StingRay and BioRay Laser Diode Modules QBH Fiber Optic Cable HighLight™ FL-ARM DC Series Levante IR femtosecond OPO DIAMOND C-Series and Cx-Series Sapphire SF (Single-Frequency) HighLight…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

Diamond E-400 Series OEM Lasers Preinstallation Manual 24 2. Remove the top cover (Figure 8). 3. Remove the water hose/filter kit, if provided (see Figure 9). Figure 8. Top Cover Removed Figure 9. Water Hoses and Filter Removal (if provided)

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

Diamond E-400 Series OEM Lasers Preinstallation Manual 44 NOTICE! To avoid damaging the laser system, the coolant inlet and outlet must always be connected as specified. Any other connection method, e.g. connecting the laser head and RF power module in parallel with 2 separate inlets and outlets,…

Microelectronics

Microelectronics

…Global support and access to our fully equipped application centers are provided to ensure successful implementation. Related Products DIAMOND E-Series DIAMOND GEM-Series LAMBDA SX AVIA NX LEAP MATRIX QS DPSS Lasers Related Product Families Laser Tools and Systems Laser Direct Imaging Coherent…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

Diamond E-400 Series OEM Lasers Preinstallation Manual 30 13. Using the shackles provided, latch both eyebolts to the spreader bar as shown in Figure 19. Fully tighten the shackle pin. Figure 19. Attaching Eyebolts to Spreader Bar

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

Diamond E-400 Series OEM Lasers Preinstallation Manual 28 10. Install eyebolts to each end of the laser system (Figure 16). 11. Ensure both ratchet straps are clear of the laser system (Figure 17). Figure 16. Installation of Eyebolts Figure 17. Clear Straps from Laser System

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

Diamond E-400 Series OEM Lasers Preinstallation Manual 46

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions