Ask a Question
Coherent

Search Results

25 - 36 of 97 Products for 'diamond e 400' Page 3 of 9 |
Related Categories: 1000w Co2 | J Series | Gem Laser | E400 | Diamond Series

diamond e 400

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

Diamond E-400 Series OEM Lasers Preinstallation Manual 32 15. Carefully cut open and remove the moisture seal bag (Figure 21). NOTICE! To avoid damage to the laser system, let the system equilibrate to room temperature before opening the moisture seal bag. 16. Locate and remove the sealed plastic…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

Diamond E-400 Series OEM Lasers Preinstallation Manual 40 3. Carefully lift the laser system while preventing the free end from moving around. See Figure 27. Figure 27. Vertical Mounting Illustration (2) EYEBOLTS (SUPPLIED BY COHERENT) (3) EYEBOLTS W/ HEX NUTS (REMOVE FROM PROVIDED SPREADER BAR)…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

Diamond E-400 Series OEM Lasers Preinstallation Manual 26 6. Two people are required to carefully lift the wooden side panels up and over, exposing the system (Figure 12). 7. Cut the tape securing the top end of the user documents bag from the laser moisture seal bag (Figure 13). Figure 12. E-400…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

Diamond E-400 Series OEM Lasers Preinstallation Manual 32 15. Carefully cut open and remove the moisture seal bag (Figure 21). NOTICE! To avoid damage to the laser system, let the system equilibrate to room temperature before opening the moisture seal bag. 16. Locate and remove the sealed plastic…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

Diamond E-400 Series OEM Lasers Preinstallation Manual 40 3. Carefully lift the laser system while preventing the free end from moving around. See Figure 27. Figure 27. Vertical Mounting Illustration (2) EYEBOLTS (SUPPLIED BY COHERENT) (3) EYEBOLTS W/ HEX NUTS (REMOVE FROM PROVIDED SPREADER BAR)…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

Diamond E-400 Series OEM Lasers Preinstallation Manual viii Preface This manual provides preinstallation instructions for DIAMONDTM E-400 Series lasers - OEM version. The laser safety section must be reviewed thoroughly prior to operating the DIAMOND E-400 Series laser system. NOTICE! Read the…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

Diamond E-400 Series OEM Lasers Preinstallation Manual viii Preface This manual provides preinstallation instructions for DIAMONDTM E-400 Series lasers - OEM version. The laser safety section must be reviewed thoroughly prior to operating the DIAMOND E-400 Series laser system. NOTICE! Read the…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

Diamond E-400 Series OEM Lasers Preinstallation Manual viii Preface This manual provides preinstallation instructions for DIAMONDTM E-400 Series lasers - OEM version. The laser safety section must be reviewed thoroughly prior to operating the DIAMOND E-400 Series laser system. NOTICE! Read the…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

Diamond E-400 Series OEM Lasers Preinstallation Manual 14 Coherent has identified a suitable dry air purge filter which filters to 0.1 microns and dries the air to a dew point of -40°C (-40°F). The filter is shown in Figure 5 and is widely available. For additional information on the Purge…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

Diamond E-400 Series OEM Lasers Preinstallation Manual 42 Coolant Line Connections The direction of fluid flow is first into the laser head module and then through the RF power module. Figure 28. Output End View Figure 29. Interface Connectors End View 120.4 mm [4.74 in] 40 mm [1.57 in.] 80 mm [3.15…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

Diamond E-400 Series OEM Lasers Preinstallation Manual 14 Coherent has identified a suitable dry air purge filter which filters to 0.1 microns and dries the air to a dew point of -40°C (-40°F). The filter is shown in Figure 5 and is widely available. For additional information on the Purge…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

Diamond E-400 Series OEM Lasers Preinstallation Manual 42 Coolant Line Connections The direction of fluid flow is first into the laser head module and then through the RF power module. Figure 28. Output End View Figure 29. Interface Connectors End View 120.4 mm [4.74 in] 40 mm [1.57 in.] 80 mm [3.15…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions