Ask a Question
Coherent

Search Results

Refine

Result Type

37 - 48 of 237 Products for 'diamond e 400' Page 4 of 20 |

diamond e 400

00 E-400 Preinstall.book

00 E-400 Preinstall.book

Diamond E-400 Preinstallation Manual 19 17. Secure the spreader bar to the forklift or hoist capable of lifting 250 lbs. Carefully lift the laser onto a cart as shown in Figure 15. Figure 15. Lifting the E-400

00 E-400 Preinstall.book

00 E-400 Preinstall.book

Diamond E-400 Preinstallation Manual 20 18. Carefully cut open and remove the moisture seal bag (Figure 16). Let the system equilibrate to room temperature before opening the moisture seal bag. Figure 16. Opening the Moisture Seal Bag

00 E-400 Preinstall.book

00 E-400 Preinstall.book

Diamond E-400 Preinstallation Manual 22 21. Using the necessary personnel, remove and carefully set the laser equipment on a clean and flat surface, such as an optical table (Figure 3-19). Figure 19. E-400 Unwrapped

00 E-400 Preinstall.book

00 E-400 Preinstall.book

Diamond E-400 Preinstallation Manual 12 5. Remove top the top cover (Figure 3). 6. Remove water hoses and filer (Figure 4). Figure 3. Top Cover Removed Figure 4. Water Hoses and Filter Removal

00 E-400 Preinstall.book

00 E-400 Preinstall.book

Diamond E-400 Preinstallation Manual 17 15. Using an adjustable wrench, loosen the two (2) bolts that clamp the spreader bar to the underside of the top cover (Figure 13). Figure 13. Removing Spreader from Crate

00 E-400 Preinstall.book

00 E-400 Preinstall.book

Diamond E-400 Preinstallation Manual 19 17. Secure the spreader bar to the forklift or hoist capable of lifting 250 lbs. Carefully lift the laser onto a cart as shown in Figure 15. Figure 15. Lifting the E-400

00 E-400 Preinstall.book

00 E-400 Preinstall.book

Diamond E-400 Preinstallation Manual 20 18. Carefully cut open and remove the moisture seal bag (Figure 16). Let the system equilibrate to room temperature before opening the moisture seal bag. Figure 16. Opening the Moisture Seal Bag

00 E-400 Preinstall.book

00 E-400 Preinstall.book

Diamond E-400 Preinstallation Manual 22 21. Using the necessary personnel, remove and carefully set the laser equipment on a clean and flat surface, such as an optical table (Figure 3-19). Figure 19. E-400 Unwrapped

00 E-400 Series Preinstall.book

00 E-400 Series Preinstall.book

Diamond E-400 Series OEM Lasers Preinstallation Manual 24 2. Remove the top cover (Figure 8). 3. Remove the water hose/filter kit, if provided (see Figure 9). Figure 8. Top Cover Removed Figure 9. Water Hoses and Filter Removal (if provided)

00 E-400 Series Preinstall.book

00 E-400 Series Preinstall.book

Diamond E-400 Series OEM Lasers Preinstallation Manual 30 13. Using the shackles provided, latch both eyebolts to the spreader bar as shown in Figure 19. Fully tighten the shackle pin. Figure 19. Attaching Eyebolts to Spreader Bar

00 E-400 Series Preinstall.book

00 E-400 Series Preinstall.book

Diamond E-400 Series OEM Lasers Preinstallation Manual 24 2. Remove the top cover (Figure 8). 3. Remove the water hose/filter kit, if provided (see Figure 9). Figure 8. Top Cover Removed Figure 9. Water Hoses and Filter Removal (if provided)

00 E-400 Series Preinstall.book

00 E-400 Series Preinstall.book

Diamond E-400 Series OEM Lasers Preinstallation Manual 30 13. Using the shackles provided, latch both eyebolts to the spreader bar as shown in Figure 19. Fully tighten the shackle pin. Figure 19. Attaching Eyebolts to Spreader Bar

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions