Ask a Question
Coherent
Search Results
37 - 48 of 281 Products for 'diamond e1000' Page 4 of 24 |

diamond e1000

00 E-1000 PreInst.book

00 E-1000 PreInst.book

DIAMOND E-1000 Series OEM Lasers Preinstallation Manual 32 9. Cut the moisture seal bag along the groove between the laser head and RF power supply from eye-bolt to eye-bolt, then cut across the bag top at both ends (Figure 14). Figure 14. Cutting Top of Moisture Seal Bag

00 E-1000 PreInst.book

00 E-1000 PreInst.book

DIAMOND E-1000 Series OEM Lasers Preinstallation Manual 34 11. Place the laser system on a cart capable of supporting and transporting 173 kg (381 lbs.) (Figure 16). 12. Locate and remove the sealed plastic bag containing the RF power supply system cable (Figure 17). Figure 16. Place Laser System on…

00 E-1000 PreInst.book

00 E-1000 PreInst.book

DIAMOND E-1000 Series OEM Lasers Preinstallation Manual 56 System Data/Info Page This page (Figure 32) provides general system data. In addition, there is a utility to change the IP address of the system. Coherent recommends that the system be first used with its default IP address. Figure 32.…

00 E-1000 PreInst.book

00 E-1000 PreInst.book

…to open a TCP socket to the DIAMOND E-1000 Series. Connection Requirements Any TCP client software or firmware can communicate with the E-1000 Series. However, only one socket to port 5000 is allowed at this time. Simply open a socket to the IP address of the E-1000 Series using port 5000. When…

00 E-1000 PreInst.book

00 E-1000 PreInst.book

…to open a TCP socket to the DIAMOND E-1000 Series. Connection Requirements Any TCP client software or firmware can communicate with the E-1000 Series. However, only one socket to port 5000 is allowed at this time. Simply open a socket to the IP address of the E-1000 Series using port 5000. When…

00 E-1000 PreInst.book

00 E-1000 PreInst.book

…to open a TCP socket to the DIAMOND E-1000 Series. Connection Requirements Any TCP client software or firmware can communicate with the E-1000 Series. However, only one socket to port 5000 is allowed at this time. Simply open a socket to the IP address of the E-1000 Series using port 5000. When…

00 E-1000 PreInst.book

00 E-1000 PreInst.book

DIAMOND E-1000 Series OEM Lasers Preinstallation Manual 48 Mounting Accessories to Laser Aperture The E-1000 Series lasers have provisions for the customer to mount optics/accessories via the laser front plate. The following provisions must be followed: · Accessory mount maximum load: 2.3 kg (5…

00 E-1000 PreInst.book

00 E-1000 PreInst.book

DIAMOND E-1000 Series OEM Lasers Preinstallation Manual 48 Mounting Accessories to Laser Aperture The E-1000 Series lasers have provisions for the customer to mount optics/accessories via the laser front plate. The following provisions must be followed: · Accessory mount maximum load: 2.3 kg (5…

00 E-1000 PreInst.book

00 E-1000 PreInst.book

DIAMOND E-1000 Series OEM Lasers Preinstallation Manual 48 Mounting Accessories to Laser Aperture The E-1000 Series lasers have provisions for the customer to mount optics/accessories via the laser front plate. The following provisions must be followed: · Accessory mount maximum load: 2.3 kg (5…

00 E-1000 PreInst.book

00 E-1000 PreInst.book

DIAMOND E-1000 Series OEM Lasers Preinstallation Manual 36 a. Laser Head b. RF Power Supply Figure 18. DIAMOND E-1000 Series System Installation in OEM Equipment 200 [8.0] MIN CLEARANCE REQ'D TO REPLACE RFPS 18.5 .73 240.4 9.47 OUTPUT END VIEW 120.4 4.74 472 18.6 MIN CLEARANCE REQ'D FOR LIFTING…

00 E-1000 PreInst.book

00 E-1000 PreInst.book

DIAMOND E-1000 Series OEM Lasers Preinstallation Manual 36 a. Laser Head b. RF Power Supply Figure 18. DIAMOND E-1000 Series System Installation in OEM Equipment 200 [8.0] MIN CLEARANCE REQ'D TO REPLACE RFPS 18.5 .73 240.4 9.47 OUTPUT END VIEW 120.4 4.74 472 18.6 MIN CLEARANCE REQ'D FOR LIFTING…

00 E-1000 PreInst.book

00 E-1000 PreInst.book

Diamond E-1000 Series OEM Lasers Preinstallation Manual vi LIST OF TABLES 1. Pre-installation Checklist.................................................................................................... 2 2. Recommended Coolant for E-1000 Series Lasers…

Powered by Site Search powered by SLI Systems

Call 1-800-227-8840


Outside the U.S. 1-408-764-4983

Coherent has locations across the globe that are available to provide support for any product, service or inquiry.

Visit our Contact Page to connect with any of our global sites.


Corporate Headquarters
Coherent Inc.
5100 Patrick Henry Drive
Santa Clara, CA 95054 USA

email: tech.sales@coherent.com

Send Us a Message

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions