Ask a Question
Coherent

Search Results

37 - 48 of 415 Products for 'digital modulation' Page 4 of 35 |

digital modulation

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…Accessories Key Features · Compact and modular OEM design · Superior beam quality · Minimal laser output RMS noise · Complete CDRH safety features for scientific and laboratory use · TEC temperature-stabilized and conductively cooled through baseplate · Analog and digital modulation · USB and RS-232

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…Accessories Key Features · Compact and modular OEM design · Superior beam quality · Minimal laser output RMS noise · Complete CDRH safety features for scientific and laboratory use · TEC temperature-stabilized and conductively cooled through baseplate · Analog and digital modulation · USB and RS-232

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…Accessories Key Features · Compact and modular OEM design · Superior beam quality · Minimal laser output RMS noise · Complete CDRH safety features for scientific and laboratory use · TEC temperature-stabilized and conductively cooled through baseplate · Analog and digital modulation · USB and RS-232

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…in.) 5 mm (0.20 in.) 6 mm (0.25 in.) 90 mm (3.54 in.) Ø4.2 mm (0.17 in.) 4 PLACES Ø3 mm (0.118 in.) Dowel Hole Laser Aperture USB DE 15 Digital Modulation SMB 3 x 7 mm (0.118 x 0.28 in.) Dowel Slot 5 mm (0.20 in.) 19 mm (0.75 in.) 15.5 mm (0.61 in.) 40 mm (1.58 in.) 40 mm (1.58 in.) 100 mm (3.94…

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…in.) 5 mm (0.20 in.) 6 mm (0.25 in.) 90 mm (3.54 in.) Ø4.2 mm (0.17 in.) 4 PLACES Ø3 mm (0.118 in.) Dowel Hole Laser Aperture USB DE 15 Digital Modulation SMB 3 x 7 mm (0.118 x 0.28 in.) Dowel Slot 5 mm (0.20 in.) 19 mm (0.75 in.) 15.5 mm (0.61 in.) 40 mm (1.58 in.) 40 mm (1.58 in.) 100 mm (3.94…

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…in.) 5 mm (0.20 in.) 6 mm (0.25 in.) 90 mm (3.54 in.) Ø4.2 mm (0.17 in.) 4 PLACES Ø3 mm (0.118 in.) Dowel Hole Laser Aperture USB DE 15 Digital Modulation SMB 3 x 7 mm (0.118 x 0.28 in.) Dowel Slot 5 mm (0.20 in.) 19 mm (0.75 in.) 15.5 mm (0.61 in.) 40 mm (1.58 in.) 40 mm (1.58 in.) 100 mm (3.94…

00 LabLaser.book

00 LabLaser.book

…18 Digital TTL Modulation of Laser Power With the MVP laser module, digital signal modulation can be accomplished with any TTL-compatible output signal. The TTL signal must be a voltage output able to drive a 5 KOhm load. This applies to both the VLM2 and the LabLaser. With digital modulation, the…

00 LabLaser.book

00 LabLaser.book

…18 Digital TTL Modulation of Laser Power With the MVP laser module, digital signal modulation can be accomplished with any TTL-compatible output signal. The TTL signal must be a voltage output able to drive a 5 KOhm load. This applies to both the VLM2 and the LabLaser. With digital modulation, the…

00 LabLaser.book

00 LabLaser.book

…18 Digital TTL Modulation of Laser Power With the MVP laser module, digital signal modulation can be accomplished with any TTL-compatible output signal. The TTL signal must be a voltage output able to drive a 5 KOhm load. This applies to both the VLM2 and the LabLaser. With digital modulation, the…

Book.book

Book.book

…and be turned ON-OFF by the Digital modulation input voltage (TTL High is ON). The "CAL=" command sets the maximum output power when the Analog modulation is at + 5 VDC and the Digital modulation is set to TTL high. The rise and fall times for the Digital modulation input are less than 2 ns with…

Book.book

Book.book

…and be turned ON-OFF by the Digital modulation input voltage (TTL High is ON). The "CAL=" command sets the maximum output power when the Analog modulation is at + 5 VDC and the Digital modulation is set to TTL high. The rise and fall times for the Digital modulation input are less than 2 ns with…

Book.book

Book.book

…and be turned ON-OFF by the Digital modulation input voltage (TTL High is ON). The "CAL=" command sets the maximum output power when the Analog modulation is at + 5 VDC and the Digital modulation is set to TTL high. The rise and fall times for the Digital modulation input are less than 2 ns with…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions