1 - 10 of 262 Search Results for diode laser soldering
|
|
|
1.
Coherent Inc. Diode Laser Soldering
|
|
…solder, the optimum parameters were 8 watts for 0.8 sec. For silver-tin solder, the optimum parameters were 10 watts for 0.8 sec. Fig. 1 - Solder performs in place before laser soldering. Fig. 2 - Pins after soldering with FAP system. Comments: Diode lasers can be used to produce high-quality solder…
Related Searches: 30 watt laser diode | fap800 | fap 600
|
|
|
|
|
3.
Micro-welding
(PAGE 1 OF 2)
|
|
…wave soldering is not always possible, and this has led to
a demand for selective soldering processes.
The use of direct-diode lasers for laser soldering has, therefore significantly increased
within the last two years. The majority of systems currently employed for laser soldering
…
|
|
|
|
|
5.
Coherent Inc. Coherent in the News
|
|
|
…August 2002, Laser Focus World White Paper Non-Metal Laser Cutting with CO 2 Lasers January 2002, Coherent Article Welding with CO 2 Lasers January 2002, Coherent Article Soldering with High-Power Diode Lasers â Process Optimization March 2002, Application Report Diode Laser Soldering for the Telecom…
|
|
|
|
|
6.
Micro-welding
(PAGE 2 OF 2)
|
|
…5. PbSn solder, 6 watts, 0.8 sec
Figure 6. PbSn solder, 6 watts, 0.8 sec
Soldering with High-Power Diode Lasers - Process Optimization
Lead-Tin Soldering -`Dry'Joints
Figure 2. PbSn solder, 10 watts, 0.8 sec
Lead-tin Soldering -Over-heated Joints Lead-Tin Soldering -Optimized…
|
|
|
|
7.
Soldering TelecomRev2
|
Best match in this PDF
|
All matches in this PDF
|
…quality of the soldered joints. Conclusions The laser soldering of gold-metalized telecom fibers to gold-plated substrates has been successfully performed using diode lasers at relatively low average powers. · A pulsing technique was developed that produced repeatable, high-quality solder joints. · Very…
Related Searches: soldering
|
|
|
|
|
8.
F-Package
(PAGE 1 OF 2)
|
|
…/or robots to provide
precise, contactless soldering.
Soldering with high-power diode lasers
For soldering tasks within the microelectronics industry, an average
laser power range of 2 to 80 watts can be used, depending on the solder
joint dimensions and required speed. Coherent…
Related Searches: fap 800
|
|
|
|
|
9.
Proc OptimizationRev2
|
Best match in this PDF
|
All matches in this PDF
|
|
…the Laser Application Center at: 5100 Patrick Henry Drive Santa Clara, CA 95054 Telephone: 877-434-6337 Fax: 408-764-4329 E-mail: csd.sales@coherentinc.com Web: www.CoherentInc.com Figure 5. PbSn solder, 6 watts, 0.8 sec Figure 6. PbSn solder, 6 watts, 0.8 sec Soldering with High-Power Diode Lasers - Process…
|
|
