Ask a Question
Coherent
Search Results
25 - 36 of 103 Products for 'e 400 head' Page 3 of 9 |

e 400 head

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

…hardware into tool [ ] Laser head mounting area prepared: lift access, mounting feet installed, able to support 75 kg (165 lbs.) laser system plus weight of cables, hoses, output aperture accessories, etc. [ ] Service access provided [ ] All connections reach the laser head "Laser Installation Area"…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

…cause contamination of the laser head optics as well as the beam delivery optics and electronic components. Contamination will severely degrade the system performance and can lead to damage or failure of sensitive components. Passing a purge gas through the laser head and RF power module can prevent…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

…rate to the laser system. NOTICE! Other inert gases such as argon (Ar) must not be used. Use of inert gases will result in damage to the RF laser head. Only nitrogen as described above or compressed air as described below should be used as a purge gas. Guidelines for Use of Compressed Air for Purge…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

…rate to the laser system. NOTICE! Other inert gases such as argon (Ar) must not be used. Use of inert gases will result in damage to the RF laser head. Only nitrogen as described above or compressed air as described below should be used as a purge gas. Guidelines for Use of Compressed Air for Purge…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

…rate to the laser system. NOTICE! Other inert gases such as argon (Ar) must not be used. Use of inert gases will result in damage to the RF laser head. Only nitrogen as described above or compressed air as described below should be used as a purge gas. Guidelines for Use of Compressed Air for Purge…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

…Series OEM Lasers Preinstallation Manual 8 Coolant Temperature At the laser head, the inlet temperature of the cooling fluid should always be above the dew point to prevent condensation from developing inside the laser head or RF power module. Coolant Filtering To prevent accumulation of debris in…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

…Accessory Coupler The laser head output aperture provides accommodation for a 50 mm (2") OD beam tube to couple to the laser head. Enclosing the beam within gas-purged metallic tubes is a safe and recommended method of transmitting the beam from the laser head to the work piece. Purge Providing…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

…Series OEM Lasers Preinstallation Manual 8 Coolant Temperature At the laser head, the inlet temperature of the cooling fluid should always be above the dew point to prevent condensation from developing inside the laser head or RF power module. Coolant Filtering To prevent accumulation of debris in…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

…Accessory Coupler The laser head output aperture provides accommodation for a 50 mm (2") OD beam tube to couple to the laser head. Enclosing the beam within gas-purged metallic tubes is a safe and recommended method of transmitting the beam from the laser head to the work piece. Purge Providing…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

…Series OEM Lasers Preinstallation Manual 8 Coolant Temperature At the laser head, the inlet temperature of the cooling fluid should always be above the dew point to prevent condensation from developing inside the laser head or RF power module. Coolant Filtering To prevent accumulation of debris in…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

…Accessory Coupler The laser head output aperture provides accommodation for a 50 mm (2") OD beam tube to couple to the laser head. Enclosing the beam within gas-purged metallic tubes is a safe and recommended method of transmitting the beam from the laser head to the work piece. Purge Providing…

00 E-400 E-1000 Series Preinstall.book

00 E-400 E-1000 Series Preinstall.book

Utility Requirements and System Installation 35 a. Laser Head Figure 25. E-400 & E-400i System Installation in OEM Equipment (Dimensions in mm [inches] and Required Clearances) [8.0 in.] FOR SERVICE ACCESS 200 mm MIN CLEARANCE RQD FOR INTERFACE [8.0 in] MIN CLEARANCE RQD 200 mm 250 mm [10.0 in.]…

Powered by Site Search powered by SLI Systems

Call 1-800-227-8840


Outside the U.S. 1-408-764-4983

Coherent has locations across the globe that are available to provide support for any product, service or inquiry.

Visit our Contact Page to connect with any of our global sites.


Corporate Headquarters
Coherent Inc.
5100 Patrick Henry Drive
Santa Clara, CA 95054 USA

email: tech.sales@coherent.com

Send Us a Message

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions