Search Results

25 - 36 of 54 Products for 'effective beam diameter' Page 3 of 5 |

effective beam diameter

COHR HighLightFL Compact SingleMode DS 0818.pdf

COHR HighLightFL Compact SingleMode DS 0818.pdf

…HighLight
FL2000CSM
HighLight
FL2500CSM
Nominal Power (W) 500 750 1000 1500 2000 2500
Power Range (%) 10 to 100
Laser Beam Quality (BPP) at Collimator 0.4 mm x mrad
Power Stability (%) ± 2
Pulse Frequency Range CW - 5 kHz
Wavelength (nm) 1070 ± 10

COHR HighLightFL Standard FFS DS 0818.pdf

COHR HighLightFL Standard FFS DS 0818.pdf

…SPECIFICATIONS HighLight FL3000 HighLight FL4000 HighLight FL5000
Nominal Power (W) 3000 4000 5000
Power Range (%) 10 to 100
Laser Beam Quality (BPP) at Collimator 3 mm x mrad BPP 4 mm x mrad for 100 µm fiber
Power Stability (%) ± 2
Pulse Frequency Range CW to 5 kHz

COHR HighLight DL-HP DS 0918.pdf

COHR HighLight DL-HP DS 0918.pdf

…HighLight
DL6000HP
HighLight
DL8000HP
Nominal Power (Wcw) 3000 4000 5000 6000 8000
Power Range (%) 10 to 100
Laser Beam Quality (BPP) 100 mm x mrad
Power Stability ±2% over 24 h (cooling water ±1K)
Pulse Frequency Range Laser ON signal: 1kHz
Analog…

COHR HighLight DL-HQ DS 0918.pdf

COHR HighLight DL-HQ DS 0918.pdf

…SPECIFICATIONS HighLight DL2000HQ HighLight DL3000HQ HighLight DL4000HQ
Nominal Power (Wcw) 2000 3000 4000
Power Range (%) 10 to 100
Laser Beam Quality (BPP) 44mm x mrad <30mm x mrad
Power Stability ±2% over 24 h (cooling water ±1K)
Pulse Frequency Range Laser ON signal:…

Photonics Spectra - March 2018

Photonics Spectra - March 2018

…laser beam can then be used
to produce cuts with unmatched edge
quality and no residual stress, which is
particularly important for touch screens.
It can also readily cut curves of varying
geometries and radii of curvature. In addition, the typical filament diameter is in…

COHR MaterialsProcessingBrochure 0816revA 3.pdf

COHR MaterialsProcessingBrochure 0816revA 3.pdf

…power levels starting
with 1 kW. Customers can choose between multiple QBH connected
delivery fiber diameters, however, its connector is delivered as a
standard.The beam profile is optimized for cutting and welding
applications.When processing highly reflective materials like…

COHR LaserCam-HRII DS 0318 2.pdf

COHR LaserCam-HRII DS 0318 2.pdf

…accessory
190 to 11001
400 to 1100
190 to 355
190 to 11001
400 to 1100
190 to 355
190 to 355
Recommended Beam Diameters (mm) 0.15 to 4.02 0.2 to 6.02 0.5 to 6.0
Capture Modes Continuous (CW), pulsed
Variable Exposure Time 1 msec to 500 msec,

Coherent Optoskand Brochure 10-20-17.pdf

Coherent Optoskand Brochure 10-20-17.pdf

…optics
can be mounted. The beam bending cube turns the collimated
beam path 90 degrees. The twin-spot optics divides the laser
beam into two parts, resulting in two focused spots after the
focusing unit.
Prealigned optics
The effective focal length of a lens will vary…

Information Display Magazine September/October 2017, Vol. 33, No. 5 issue

Information Display Magazine September/October 2017, Vol. 33, No. 5 issue

…the beam
focusing optics are properly configured, this
focusing/defocusing effect can be balanced to
repeat periodically and form a stable filament
that extends over several millimeters in depth
within an optically transparent material. The
typical filament diameter is…

Bio Photonics - April 2015

Bio Photonics - April 2015

…increasing the pump diode
power. And OPSL output can be smoothly
adjusted from a few percent to maximum
power with no effect on beam quality or
beam pointing, since OPSL technology
does not suffer from thermal lensing,
which prevents wide power adjustment in

Industrial Photonics - October 2014

Industrial Photonics - October 2014

…the material. Specifically, the high
intensity of the ultrafast pulse induces the Kerr effect,
resulting in a change in refractive index within the medium, which causes self-focusing of the beam. The filament can extend through the entire thickness of the glass
and generate a plasma,…

LLO WavelengthAdvantage.pdf

LLO WavelengthAdvantage.pdf

…size wafers up to 300 mm diameter or large Gen 5.5 to Gen 8 substrate panels which have to be released from polymer thin films, it is most effective to use line beam scanning for LLO within one or two consecutive scans. The figure below shows an optical system for line beam generation. At typical…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions