Search Results

25 - 36 of 87 Products for 'energy max' Page 3 of 8 |

energy max

GeoLasHD excimer ablation laser system | Coherent

GeoLasHD excimer ablation laser system | Coherent

…--> Features & Benefits Model GeoLasHD Wavelength (nm) 193 Energy Density on Sample (J/cm 2) 1 - 50 Spot Diameter on Sample (µm) 2 - 160 Optical Resolution (µm) 1 Pulse Energy Stability (%, rms) 1 Beam Homogeneity (%, rms) 1 Max. Repetition Rate (Hz) 10 (opt. 100) X,Y-Drive Min. Step Size (µm)…

The Staccato Laser | Coherent

The Staccato Laser | Coherent

…Drift 2 (max. temp. drift 1°C/h) ≤50 μrad + 50 μrad/°C ambient temp. Laser Beam Polarization Ratio ≥100:1 linear Laser Beam Polarization Direction Horizontal, ±2º 940 nm Pump Leakage Power (mW) ≤10 avg. Amplified Pulse Energy to Unamplified Pulse Energy Ratio ≥1000:1 Amplified Pulse Energy to…

Fiber-to-Fiber Optic Switch | Coherent

Fiber-to-Fiber Optic Switch | Coherent

…time or energy shared between several fiber optic cables. The FFS has one fiber input and up to four fiber outputs. This opens up for flexible and cost-effective use of your laser source. The FFS is safety certified by DGUV. Tech spec Max. power (CW) 8 kW Magnification 0.6 / 1.0 / 1.2 Max. NA 0.12…

Incoupling Optics

Incoupling Optics

…or free space-to-fiber coupling
* <45 ms switch time
* Time or energy share
* High-quality optics
* DGUV-certified safety concept
* Fast Fiber Break Detection (FFBD)
* Control and Safety Electronics FFS FFS ac FFC FFC ac FCU FIM Max. Power (CW) 8 kW 4.5 kW 12 kW 4.5 kW 4.5 kW n/a Fiber Input 1 1 0
*…

Intermediate Optics

Intermediate Optics

…can be time or energy shared between several fiber optic cables. The FFS has one fiber input and up to four fiber outputs. This opens up for flexible and cost-effective use of your laser source. The FFS is safety certified by DGUV. Tech spec Beam Bending Cube Diameters d50 d25 Max. power (CW) d50:…

250 kHz Ultrafast Amplifiers

250 kHz Ultrafast Amplifiers

…and pulse energy up to 200 µJ. Pulsed Q-Switched Pulsed Q-Switched A complete portfolio of Q-switched DPSS lasers is available at wavelengths in the infrared, visible, and ultraviolet, with a broad range of average powers and repetition rates ranging from 1 to 350 khz, with pulse energies ranging…

Fiber Coupling Unit

Fiber Coupling Unit

…sensors for improved supervising. The unit is easily integrated to the laser. Tech spec Max. power (CW) 4.5 kW Focal lengths 50, 60, 70, 85, 100 mm Max. collimated beam Ø18 mm (incl. 99% of the beam energy) Optics material Synthetic fused silica AR-coatings 1030-1090 nm, 780-1100 nm, 510-550 nm…

COHR MonacoSmartCleave DS 0318 4.pdf

COHR MonacoSmartCleave DS 0318 4.pdf

…±5
Output Power (W) 40 60
Energy (µJ) 40 (at 1 MHz) 80 (at 750 kHz)
Seeder Burst Mode (µJ) (max. energy) >200 >320
Seeder Burst Count (µJ) (max. energy) 5 x 40 4 x 80
Seeder Burst Mode Repetition Rate (kHz) (max. energy) 200 188
Native Repetition Rate Single-shot…

COHR VarioLas DS 0418 7.pdf

COHR VarioLas DS 0418 7.pdf


Working Distance (mm) 50 50 150
Max. Repetition Rate (Hz) 100 100 100
Max. Energy Density (mJ/cm2)
at 193 nm
at 248 nm
at 308 nm
1000
3500
3000
1000
3500
3000
230
600
500
Energy Stability (%, 1 sigma)
at 193 nm

PM135K100&5K200.p65

PM135K100&5K200.p65

…to 11 0.19 to 11 0.19 to 11 0.19 to 11
Max Power (W) 1,000 3,000 5,000 5,000
Max Intermittent Power (< 5 min) (W) 1,500 4,000 7,500 7,500
Resolution (W) 1 1 1 1
Max Avg Power Density (kW/cm2)
* 26 26 26 26
Max Pulse Energy Density (J/cm2) 0.6 0.6 0.6 0.6
Response…

Flyer NA 2017 en.pdf

Flyer NA 2017 en.pdf

energy max. 5 J 7 J 30 J 30 J
Pulse power at 1 ms max. 30 kW 30 kW
Pulse Power at 0.5 ms max. 10 kW 14 kW
Average Power max. 20 W 28 W 150 W 150 W
Line Power
Configuration 3-phase + ground
Multitap transformator for 3 x 200 to 480 VAC ±10%
Power consumption max. 25…

COHR LEAPseries DS 0518 9.pdf

COHR LEAPseries DS 0518 9.pdf

…20 25
<0.5%
30
Energy Stability (,%)
0.5
1.0
1.5
2.0
2.5
LEAP 150K 1 Joule at 150 Hz,
Dynamic Energy Range (typical data)
LEAP 150K 1 Joule at 150 Hz,
Energy Stability over 30 Mio. Pulses
1 Max. pulse energy 1100 mJ at 10 Hz.

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions