Search Results

37 - 48 of 51 Products for 'environmental control unit' Page 4 of 5 |

environmental control unit

Coherent Terms and Conditions of Sale - Asia.pdf

Coherent Terms and Conditions of Sale - Asia.pdf

…regarding the
environment and the export, import or re-export of
Products, whether tangible or intangible, from the United
States of America or elsewhere, and agrees to conduct its
activities in accordance with all United States and other
environmental regulations and any…

CCPs-965-985nm-Data-Sheet.pdf

CCPs-965-985nm-Data-Sheet.pdf

…Operation Notes
Unit requires an adequate heat sink. Failure to supply an adequate heat sink will destroy the unit.
Indium foil should be used between base of diode and heatsink to ensure good thermal contact.
Torque applied to mounting screws should be controlled carefully, using a…

COHR Genesis CX355STM Compact DS 1115revB 1.pdf

COHR Genesis CX355STM Compact DS 1115revB 1.pdf

…x 138.0 x 50.8 mm (9.84 x 5.4 x 2.0 in.)
Cables (laser head to controller) 2m (6.5 ft.)
1 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
2 Circularity defined as vertical diameter divided by horizontal…

COHR VerdiG SLM-Series DS 0917 5.pdf

COHR VerdiG SLM-Series DS 0917 5.pdf

…Benchtop Controller
361 x 229 x 160 mm (14.22 x 9.01 x 6.29 in.)
Cables (laser head to controller) 3m (10 ft.)
1 Optical parameters measured at the output plane of the laser head, unless noted all parameters valid at the nominal output power and for the lifetime of the unit.
2…

COHR Genesis CX STM-Series DS 0317 1.pdf

COHR Genesis CX STM-Series DS 0317 1.pdf

…156 x 85 mm (11.06 x 6.14 x 3.35 in.)
Cables (laser head to controller) 2m (6.5 ft.)
1 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
2 Available in OEM or end user versions.
3 Circularity defined…

COHR Genesis MX MTM-Series DS 1017 4.pdf

COHR Genesis MX MTM-Series DS 1017 4.pdf

…x 156 x 85 mm (11.06 x 6.14 x 3.35 in.)
Cables (laser head to controller) 2m (6.5 ft.)
1 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
2 Contact Coherent for any specific application requirements.…

Genesis-MX-Series-607-639-MTM-End-User

Genesis-MX-Series-607-639-MTM-End-User

…x 2.76 in.)
Cables (laser head to controller) 2m (6.5 ft.)
Electrical Specifications
Environmental Conditions
1 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
2 Typical value.
3 Measured…

COHR Genesis MX SLM-Series DS 0517 3.pdf

COHR Genesis MX SLM-Series DS 0517 3.pdf

…x 156 x 85 mm (11.06 x 6.14 x 3.35 in.)
Cables (laser head to controller) 2m (6.5 ft.)
1 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
2 Circularity defined as vertical diameter divided by horizontal…

COHR Genesis MX STM-Series DS 0517 3.pdf

COHR Genesis MX STM-Series DS 0517 3.pdf

…x 156 x 85 mm (11.06 x 6.14 x 3.35 in.)
Cables (laser head to controller) 2m (6.5 ft.)
1 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
2 Circularity defined as vertical diameter divided by horizontal…

Genesis-MX-Series-607-639-STM

Genesis-MX-Series-607-639-STM

…in.)
Cables (laser head to controller) 2m (6.5 ft.)
Electrical Specifications
Environmental Conditions
1 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
2 Typical value.
3 Circularity…

COHR Genesis CX SLM-Series DS 1117 2.pdf

COHR Genesis CX SLM-Series DS 1117 2.pdf

…156 x 85 mm (11.06 x 6.14 x 3.35 in.)
Cables (laser head to controller) 2m (6.5 ft.)
1 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
2 Available in OEM or end user versions.
3 Circularity defined…

EU LASER Interview R Waldermann english.pdf

EU LASER Interview R Waldermann english.pdf

…testing and
quality control that have dramatically
improved the reliability of our products to meet highest industry standards. One important aspect of this has
been the installation of 5,000 m2² of
cleanroom space in our production
environment. We now perform all

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions