Ask a Question
Coherent
Search Results
25 - 36 of 77 Products for 'field max ii to' Page 3 of 7 |

field max ii to

Diamond E-1000-E-1000i DS 1016revE 2.pdf

Diamond E-1000-E-1000i DS 1016revE 2.pdf

…INVISIBLE AND VISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS 4 LASER PRODUCT PER EN IEC60825-1:2007/EN60825-1:2007 635 nm to 670 nm VISIBLE (1 mW) 9.1 µm to 10.8 µm INVISIBLE 2000W MAX. AVG. 6J MAX. 1 ms PULSE Benelux +31 (30) 280 6060 China +86 (10) 8215…

COHR DIAMOND E-1000 DS 0817 1.pdf

COHR DIAMOND E-1000 DS 0817 1.pdf

…AND VISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS 4 LASER PRODUCT PER EN IEC60825-1:2007/EN60825-1:2007 635 nm to 670 nm VISIBLE (1 mW) 9.1 µm to 10.8 µm INVISIBLE 2000W MAX. AVG. 6J MAX. 1 ms PULSE 471 mm (18.6 in.) 120 mm (4.7 in.) 203 mm (8.0…

COHR DIAMOND Cx-10LD DS 0617 3.pdf

COHR DIAMOND Cx-10LD DS 0617 3.pdf

…5°C to 45°C (41 to 113 °F) Altitude 2000 m (6500 ft) Humidity Non-condensing 95% Shipping/Storage Environment -10°C to +60°C (14 to 140°F), Non-condensing Coolant Distilled water with 25% to 35% Dow Frost
* Coolant Flow Rate 7.5 l/min. (2.0 gpm) Maximum Coolant Pressure 700 kPa (101 psig) Max.

COHR DIAMOND Cx-10LD DS 0617 3.pdf

COHR DIAMOND Cx-10LD DS 0617 3.pdf

…5°C to 45°C (41 to 113 °F) Altitude 2000 m (6500 ft) Humidity Non-condensing 95% Shipping/Storage Environment -10°C to +60°C (14 to 140°F), Non-condensing Coolant Distilled water with 25% to 35% Dow Frost
* Coolant Flow Rate 7.5 l/min. (2.0 gpm) Maximum Coolant Pressure 700 kPa (101 psig) Max.

Bio Photonics - May / June 2015

Bio Photonics - May / June 2015

…in terms of precision at microprocessing," said Dr. Max Kahmann, product manager of TruMicro at Trumpf GmbH in Ditzingen, Germany. "Especially processes where any kind of thermal influence is extremely critical, femtosecond pulses open the field. Some materials (e.g., nitinol) are very sensitive in…

Bio Photonics - May / June 2015

Bio Photonics - May / June 2015

…in terms of precision at microprocessing," said Dr. Max Kahmann, product manager of TruMicro at Trumpf GmbH in Ditzingen, Germany. "Especially processes where any kind of thermal influence is extremely critical, femtosecond pulses open the field. Some materials (e.g., nitinol) are very sensitive in…

Bio Photonics - May / June 2015

Bio Photonics - May / June 2015

…in terms of precision at microprocessing," said Dr. Max Kahmann, product manager of TruMicro at Trumpf GmbH in Ditzingen, Germany. "Especially processes where any kind of thermal influence is extremely critical, femtosecond pulses open the field. Some materials (e.g., nitinol) are very sensitive in…

COHR COMPexProSeries DS 1016 2.pdf

COHR COMPexProSeries DS 1016 2.pdf

…25A, 50/60 Hz switchable, 1-phase Water Cooling5 2 to 3 l/min. (0.5 to 0.8 gal./min.), 15 to 20°C, connection: 1/2" Option Unstable Resonator3 Energy 70% of stable resonator version (near field) 1 Measured at low repetition rate. 2 Measured at max. repetition rate. 3 Specified at 248 nm. 4 Typical,…

COHR COMPexProSeries DS 1016 2.pdf

COHR COMPexProSeries DS 1016 2.pdf

…25A, 50/60 Hz switchable, 1-phase Water Cooling5 2 to 3 l/min. (0.5 to 0.8 gal./min.), 15 to 20°C, connection: 1/2" Option Unstable Resonator3 Energy 70% of stable resonator version (near field) 1 Measured at low repetition rate. 2 Measured at max. repetition rate. 3 Specified at 248 nm. 4 Typical,…

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…Fall Time (10% to 90%)(sec) <1 Modulation Depth (extinction ratio) , complete On/Off RMS Noise 20 Hz to 10 MHz <0.2% 10 MHz to 500 MHz <1.0% Power Stability (8 hours, ±3°C) <_±2% Long-Term Output Power Average <_5%/1000 hrs. Warm-Up Time (minutes) <5 Spatial Mode (far field) TEMoo Pointing Stability…

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…Fall Time (10% to 90%)(sec) <1 Modulation Depth (extinction ratio) , complete On/Off RMS Noise 20 Hz to 10 MHz <0.2% 10 MHz to 500 MHz <1.0% Power Stability (8 hours, ±3°C) <_±2% Long-Term Output Power Average <_5%/1000 hrs. Warm-Up Time (minutes) <5 Spatial Mode (far field) TEMoo Pointing Stability…

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…Fall Time (10% to 90%)(sec) <1 Modulation Depth (extinction ratio) , complete On/Off RMS Noise 20 Hz to 10 MHz <0.2% 10 MHz to 500 MHz <1.0% Power Stability (8 hours, ±3°C) <_±2% Long-Term Output Power Average <_5%/1000 hrs. Warm-Up Time (minutes) <5 Spatial Mode (far field) TEMoo Pointing Stability…

Powered by Site Search powered by SLI Systems

Call 1-800-227-8840


Outside the U.S. 1-408-764-4983

Coherent has locations across the globe that are available to provide support for any product, service or inquiry.

Visit our Contact Page to connect with any of our global sites.


Corporate Headquarters
Coherent Inc.
5100 Patrick Henry Drive
Santa Clara, CA 95054 USA

email: tech.sales@coherent.com

Send Us a Message

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions