Ask a Question
Coherent

Search Results

25 - 36 of 82 Products for 'field max ii' Page 3 of 7 |

field max ii

Diamond E-1000-E-1000i DS 1016revE 2.pdf

Diamond E-1000-E-1000i DS 1016revE 2.pdf

…RADIATION. CLASS 4 LASER PRODUCT PER EN IEC60825-1:2007/EN60825-1:2007 635 nm to 670 nm VISIBLE (1 mW) 9.1 µm to 10.8 µm INVISIBLE 2000W MAX. AVG. 6J MAX. 1 ms PULSE Benelux +31 (30) 280 6060 China +86 (10) 8215 3600 France +33 (0)1 8038 1000 Germany/Austria/Switzerland Denmark +49 (6071) 968…

Bio Photonics - May / June 2015

Bio Photonics - May / June 2015

…in terms of precision at microprocessing," said Dr. Max Kahmann, product manager of TruMicro at Trumpf GmbH in Ditzingen, Germany. "Especially processes where any kind of thermal influence is extremely critical, femtosecond pulses open the field. Some materials (e.g., nitinol) are very sensitive in…

COHR COMPexProSeries 0916.pdf

COHR COMPexProSeries 0916.pdf

…0.8 gal./min.), 15 to 20°C, connection: 1/2" Option Unstable Resonator3 Energy 70% of stable resonator version (near field) 1 Measured at low repetition rate. 2 Measured at max. repetition rate. 3 Specified at 248 nm. 4 Typical, FWHM. 5 Only required above 20 Hz repetition rate. COMPexPro 110 pulse…

FieldMaxII-TO User Manual

FieldMaxII-TO User Manual

Description 3 - 1 SECTION THREE: DESCRIPTION Thank you for purchasing the FieldMaxII-TOTM--a versatile, easy-to-use digital power meter designed for field service and production applications. In this section: · Front panel (p. 3-2) · Right side panel (p. 3-4) · Left side panel (p. 3-5) There are…

COHR DIAMOND Cx-10LD DS 0617 3.pdf

COHR DIAMOND Cx-10LD DS 0617 3.pdf

…Non-condensing Coolant Distilled water with 25% to 35% Dow Frost
* Coolant Flow Rate 7.5 l/min. (2.0 gpm) Maximum Coolant Pressure 700 kPa (101 psig) Max. Pressure Differential (at 2.0 gpm) <400 kPa (58 psig) Coolant Temperature 20°C ± 1°C 1 All measurements, such as power made at 20°C ±0.5 oC…

COHR DIAMOND Cx-10LD DS 0617 3.pdf

COHR DIAMOND Cx-10LD DS 0617 3.pdf

…Non-condensing Coolant Distilled water with 25% to 35% Dow Frost
* Coolant Flow Rate 7.5 l/min. (2.0 gpm) Maximum Coolant Pressure 700 kPa (101 psig) Max. Pressure Differential (at 2.0 gpm) <400 kPa (58 psig) Coolant Temperature 20°C ± 1°C 1 All measurements, such as power made at 20°C ±0.5 oC…

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…to 500 MHz <1.0% Power Stability (8 hours, ±3°C) <_±2% Long-Term Output Power Average <_5%/1000 hrs. Warm-Up Time (minutes) <5 Spatial Mode (far field) TEMoo Pointing Stability (rad/°C) - <6 Polarization Ratio3 Minimum 100:1 Tolerances4 Beam Position (mm) - <_0.5 Beam Angle (mrad) - <_15 CDRH Laser…

Book.book

Book.book

…the reported error. Only the first command in error is reported. Table 3-13. VAL$ Format Field Contents 1 Integer time tag in internal timing units of 10 ms 2 Measurement in currently selected units (max. of 8 characters, including a decimal point or other text mirroring the display) Table 3-14.…

COHR LPXproSeries DS 1016 1.pdf

COHR LPXproSeries DS 1016 1.pdf

…Energy 70% of stable resonator version (near field) 1 157 nm with LPFpro only; 193 nm, 248 nm, and 351 nm with LPXpro F-version only; 308 nm with LPXpro C-version only. 2 At 193 nm (300 Hz only). 3 Max. average power at maximum high voltage. Max. stabilized power not specified for LPFpro. 4 At…

COHR COMPexProSeries DS 1016 2.pdf

COHR COMPexProSeries DS 1016 2.pdf

…0.8 gal./min.), 15 to 20°C, connection: 1/2" Option Unstable Resonator3 Energy 70% of stable resonator version (near field) 1 Measured at low repetition rate. 2 Measured at max. repetition rate. 3 Specified at 248 nm. 4 Typical, FWHM. 5 Only required above 20 Hz repetition rate. COMPexPro 110 pulse…

COHR COMPexProSeries 0916.pdf

COHR COMPexProSeries 0916.pdf

…0.8 gal./min.), 15 to 20°C, connection: 1/2" Option Unstable Resonator3 Energy 70% of stable resonator version (near field) 1 Measured at low repetition rate. 2 Measured at max. repetition rate. 3 Specified at 248 nm. 4 Typical, FWHM. 5 Only required above 20 Hz repetition rate. COMPexPro 110 pulse…

IndyStar DS

IndyStar DS

…Array (LAH2) H Condenser Lens (CLLA) I Homogenizer Array (SAH1) J Homogenizer Array (SAH2) K Condenser Lens (CLSA) L Field Lens (FL) M Slit Mask N CCD Camera Alignment Tool O Field Curvature Correction Lens (FCCL) P Projection Lens Doublet Q Beam Profiler CCD Camera and Power Meter R Substrate…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions