Ask a Question
Coherent
Search Results
37 - 48 of 82 Products for 'field max ii' Page 4 of 7 |

field max ii

Bio Photonics - May / June 2015

Bio Photonics - May / June 2015

…in terms of precision at microprocessing," said Dr. Max Kahmann, product manager of TruMicro at Trumpf GmbH in Ditzingen, Germany. "Especially processes where any kind of thermal influence is extremely critical, femtosecond pulses open the field. Some materials (e.g., nitinol) are very sensitive in…

Bio Photonics - May / June 2015

Bio Photonics - May / June 2015

…in terms of precision at microprocessing," said Dr. Max Kahmann, product manager of TruMicro at Trumpf GmbH in Ditzingen, Germany. "Especially processes where any kind of thermal influence is extremely critical, femtosecond pulses open the field. Some materials (e.g., nitinol) are very sensitive in…

COHR COMPexProSeries DS 1016 2.pdf

COHR COMPexProSeries DS 1016 2.pdf

…0.8 gal./min.), 15 to 20°C, connection: 1/2" Option Unstable Resonator3 Energy 70% of stable resonator version (near field) 1 Measured at low repetition rate. 2 Measured at max. repetition rate. 3 Specified at 248 nm. 4 Typical, FWHM. 5 Only required above 20 Hz repetition rate. COMPexPro 110 pulse…

COHR COMPexProSeries DS 1016 2.pdf

COHR COMPexProSeries DS 1016 2.pdf

…0.8 gal./min.), 15 to 20°C, connection: 1/2" Option Unstable Resonator3 Energy 70% of stable resonator version (near field) 1 Measured at low repetition rate. 2 Measured at max. repetition rate. 3 Specified at 248 nm. 4 Typical, FWHM. 5 Only required above 20 Hz repetition rate. COMPexPro 110 pulse…

COHR LPXproSeries DS 1016 1.pdf

COHR LPXproSeries DS 1016 1.pdf

…Energy 70% of stable resonator version (near field) 1 157 nm with LPFpro only; 193 nm, 248 nm, and 351 nm with LPXpro F-version only; 308 nm with LPXpro C-version only. 2 At 193 nm (300 Hz only). 3 Max. average power at maximum high voltage. Max. stabilized power not specified for LPFpro. 4 At…

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…to 500 MHz <1.0% Power Stability (8 hours, ±3°C) <_±2% Long-Term Output Power Average <_5%/1000 hrs. Warm-Up Time (minutes) <5 Spatial Mode (far field) TEMoo Pointing Stability (rad/°C) - <6 Polarization Ratio3 Minimum 100:1 Tolerances4 Beam Position (mm) - <_0.5 Beam Angle (mrad) - <_15 CDRH Laser…

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…to 500 MHz <1.0% Power Stability (8 hours, ±3°C) <_±2% Long-Term Output Power Average <_5%/1000 hrs. Warm-Up Time (minutes) <5 Spatial Mode (far field) TEMoo Pointing Stability (rad/°C) - <6 Polarization Ratio3 Minimum 100:1 Tolerances4 Beam Position (mm) - <_0.5 Beam Angle (mrad) - <_15 CDRH Laser…

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…to 500 MHz <1.0% Power Stability (8 hours, ±3°C) <_±2% Long-Term Output Power Average <_5%/1000 hrs. Warm-Up Time (minutes) <5 Spatial Mode (far field) TEMoo Pointing Stability (rad/°C) - <6 Polarization Ratio3 Minimum 100:1 Tolerances4 Beam Position (mm) - <_0.5 Beam Angle (mrad) - <_15 CDRH Laser…

COHR COMPexProSeries 0916.pdf

COHR COMPexProSeries 0916.pdf

…0.8 gal./min.), 15 to 20°C, connection: 1/2" Option Unstable Resonator3 Energy 70% of stable resonator version (near field) 1 Measured at low repetition rate. 2 Measured at max. repetition rate. 3 Specified at 248 nm. 4 Typical, FWHM. 5 Only required above 20 Hz repetition rate. COMPexPro 110 pulse…

COHR COMPexProSeries 0916.pdf

COHR COMPexProSeries 0916.pdf

…0.8 gal./min.), 15 to 20°C, connection: 1/2" Option Unstable Resonator3 Energy 70% of stable resonator version (near field) 1 Measured at low repetition rate. 2 Measured at max. repetition rate. 3 Specified at 248 nm. 4 Typical, FWHM. 5 Only required above 20 Hz repetition rate. COMPexPro 110 pulse…

COHR COMPexProSeries 0916.pdf

COHR COMPexProSeries 0916.pdf

…0.8 gal./min.), 15 to 20°C, connection: 1/2" Option Unstable Resonator3 Energy 70% of stable resonator version (near field) 1 Measured at low repetition rate. 2 Measured at max. repetition rate. 3 Specified at 248 nm. 4 Typical, FWHM. 5 Only required above 20 Hz repetition rate. COMPexPro 110 pulse…

VerdiFamily DS

VerdiFamily DS

…V12 V18 Output Power (W) >2 >6 >8 >10 >12 >18 Wavelength (nm) 532 Linewidth1 (MHz) 100:1 Operating Voltage (VAC) 100 to 240 Frequency (HZ) 50/60 Max. Operating Current (A)(@ 100 VAC) 7.8 13 PZT Input Voltage7 (V/channel) 0 to +100 PZT Tuning Range7 (GHz) >8.2 >6.4 PZT Bandwidth7 DC to 20 kHz Power…

Powered by Site Search powered by SLI Systems

Call 1-800-227-8840


Outside the U.S. 1-408-764-4983

Coherent has locations across the globe that are available to provide support for any product, service or inquiry.

Visit our Contact Page to connect with any of our global sites.


Corporate Headquarters
Coherent Inc.
5100 Patrick Henry Drive
Santa Clara, CA 95054 USA

email: tech.sales@coherent.com

Send Us a Message

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions