Search
Superior Reliability & Performance

  • Lasers and Laser-based Systems
  • Laser Measurement and Control
  • Precision Optics
  • Related Accessories
1 - 10 of 618 Search Results for filter

1Coherent Inc. Interference Filters more resistant than standard
filters, which can begin to degrade after one year. Coherent's Interference Filters have an anticipated working life in excess of five years. For detailed specifications, see part number. Part Name Description 231-0050R 532 WL 10 BP Mounted Filter Mounted Filter 231-0050 532 WL 10 BP UN-MOUNTED Filter
Related Searches: birefringent filter

2pdf document  Innova300C fredmotofred preinstallation Best match in this PDF  |  All matches in this PDF
…used as an alternative. Make sure that all regulators and lines are clean and the filter is installed properly. The Innova 300C FreD / MotoFreD ion laser are supplied with 25 feet of flexible teflon tubing, a filter and an adjustable flow regulator. Nitrogen must be flowing all the time during SHG operation…
Related Searches: innova 300c fred | innova 90 user manual | fieldmaster power meter | innova 300c

3pdf document  Innova 300C preinstallation Best match in this PDF  |  All matches in this PDF
…meter (25 ft.) lengths of 16 mm (5/8 in.) I.D. hose which are supplied with each laser. These figures do not include a 60 micron water filter. A new 60 micron water filter introduces a 5 kPa (0.75 psi) pressure delta at 22.7 liters (6 gallons) per minute or a 2 kPa (0.30 psi) pressure delta at 8.5 liters…
Related Searches: lm-20 | lm20 | innova 300c | power supply

4pdf document  Laser Cooling Water Guidelines Best match in this PDF  |  All matches in this PDF
…Always use a water filter on the inlet to the laser to remove particulates. Particulates are undissolved material such as sand and rust. They can deposit on the tube, foul the flow meter, and form sediment in the cooling path. A filter is an inexpensive way to eliminate them. Water filters are rated according…
Related Searches: water chiller | 0301-120-00 | chiller | closed loop chiller

5pdf document  LaserCam-HR-UV UserManual RevAB Best match in this PDF  |  All matches in this PDF
…on Filter Glass Operation 23 Cleaning the Sensor Avoid unnecessary exposure of the sensor to dust and dirt. If the surface of the sensor has to be cleaned, never use any kind of cloth, tissue, or brush, and strictly avoid the use of any kind of cleaning fluid. Only use clean, dry, micro-filtered low…
Related Searches: uv camera | beamview | beamview 4.4.0 | beamview manual

6pdf document  HighLight 4000L Preinstallation Manual Best match in this PDF  |  All matches in this PDF
…Disconnect) DI Water Outlet DI Filter Column Particle Filter Temp Controller Fault Indicator On/Off/Remote Sw DI Water Inlet Drain Power Cord Reservoir (Tank at Bottom) SCU Interface Fill Port Description and Specifications 7 During operation, the chiller circulates filtered de-ionized water maintained…
Related Searches: class 1 | laser direct synthesis | halogen filter set | coherent logo

7pdf document  BeamMasterPC UserManual Oct2011 Best match in this PDF  |  All matches in this PDF
Filters . 10 Laser Safety . 10 Hardware Requirements . 11 Installing the PCI Interface Board . 11 Installing Windows 98/Me/2000/XP . 12 Installing Windows NT 4.0. 14 Installing the Software. 15 Connecting the Detector . 15 Selecting a Filter . 16 Focused Spot. 16 Installing the Filters . 16 Custom Filters
Related Searches: beam master | attenuator | manual | beam view analyzer

8pdf document  Diamond E-400 Series Preinstallation Manual Best match in this PDF  |  All matches in this PDF
Filtering To prevent accumulation of debris in the cooling system, the coolant should be filtered at the inlet to the laser system. Coherent recommends the use of a particle filter that traps particles larger than 30 µm in diameter, unless specified by the chiller manufacturer to use a finer filter.…
Related Searches: rf module | p n | java applet | java

9pdf document  DIAMOND E1000 premanual Best match in this PDF  |  All matches in this PDF
Filtering To prevent accumulation of debris in the cooling system, the coolant should be filtered at the inlet to the laser system. Coherent recommends the use of a particle filter that traps particles larger than 30 µm in diameter, unless specified by the chiller manufacturer to use a finer filter.…
Related Searches: shutter kits | laser beam diagnostics | diamond 84 | java

10pdf document  Cosel Best match in this PDF  |  All matches in this PDF
…Electronics, Inc. Tel: 973.779.8282 Fax: 973.779.1490 www.trcelectronics.com Recommended Noise Filter NAC-06-472 High voltage pulse noise type : NAP series Low leakage current type : NAM series *The Noise Filter is recommended *to connect with several devices. 2-M4 4-M4 Mounting Hole Name plate CN1 Output…
Related Searches: fr4


Page 1 2 3 4 5 6 7 8 9 10 11>> of 62 | Next


Site Search by  Site Search powered by SLI Systems
.