1 - 10 of 83 Search Results for gem 30 laser
|
|
|
4.
GEM-Series and C-Series
|
|
GEM-Series and C-Series Excellent Beam Quality and Fast Modulation Response from 30 Watts to 100 Watts. Offers Best Power-Size Ratio. GEM and C-Series Applications: Materials Processing Embroidering Perforation Engraving Packaging Coherent's DIAMOND C-Series CO2 lasers are the best power – size ratio ...
Related Searches: gem-30 | gem laser co2 | gem 100 | c-30
|
|
|
|
5.
Diamond_Integrators_Guide_RevAA
(PAGE 5 OF 56)
|
|
... (Example) . 11 2. Labels for Removable Housings (Example). 11 3. Aperture Warning Label . 11 4. Certification and Identification Label for a Laser System. 12 5. Recommended Cooling System Functional Block Diagram for GEM-Series Lasers .18 6. Fixed Laser with Fixed Beam Delivery System . 21 7. Beam Delivery ...
Related Searches: gem-30
|
|
|
|
6.
Diamond_Integrators_Guide_RevAA
(PAGE 41 OF 56)
|
|
Interfacing GEM-Series Lasers to Systems 35 INTERFACING DIAMOND GEM-SERIES LASERS TO SYSTEMS The GEM-series laser control is via the 15-pin D-type connector on the RF power supply. The exception is the GEM-30 where control is via the RJ-45 interface connector. The information that follows is a summary ...
Related Searches: gem 30 | gem-30 | rj45
|
|
|
|
7.
DIAMOND_brochure
(PAGE 7 OF 11)
|
|
DIAMOND cooled or liquid-cooled. Easy, economical integration with air-cooling. Folded-waveguide technology maximizes flexibility, allowing GEM-Series lasers to be air-cooled. Air-cooled units, equipped with fans and a heat sink, have low facilities requirements and minimal service needs. They are ...
Related Searches: gem 30 | gem-30
|
|
|
|
8.
Diamond_Integrators_Guide_RevAA
(PAGE 43 OF 56)
|
|
Interfacing Diamond Lasers to Systems 37 Table 6. Signal Interface Description and Connector Pinout for GEM-30 PIN NO. SIGNAL DESCRIPTION 1 RF Enable TTL logic input; 1=RF ON, 0=RF OFF; 1 k impedance This input turns on the laser. See also Pin 7, Control Enable, below. 2 SWR OK TTL logic output; 1 ...
Related Searches: gem-30
|
|
|
|
9.
Diamond_Integrators_Guide_RevAA
(PAGE 49 OF 56)
|
|
Beam Propagation Characteristics 43 BEAM PROPAGATION CHARACTERISTICS OF DIAMOND GEM-SERIES AND K-SERIES LASERS GEM, G, and K-Series Beam Propagation The following charts describe the beam propagation characteristics for the GEM-series, G-series, and K-series laser. In the following tables, the distance ...
Related Searches: k500 | k250
|
|
|
|
10.
Diamond_Integrators_Guide_RevAA
(PAGE 50 OF 56)
|
|
DiamondTM GEM, G, & K, Integrator`s Guide 44 Table 8. Beam Diameter (Inches) vs. Distance From Laser (Feet) DISTANCE FROM LASER (FEET) GEM 30/50 GEM 60/100 G50/100 K150 K250 K500 0 0.07 0.15 0.07 0.28 0.27 0.43 0.5 0.09 0.15 0.09 0.28 0.27 0.43 1.0 0.12 0.16 0.13 0.28 0.27 0.43 2.0 0.21 0.18 0 ...
Related Searches: gem-30 | gem 30
|
|