---

1.  Micromachining with Industrial Lasers ... Application Examples for Excimer Laser Microstructuring (click on any of the images above for a larger image) Images courtesy of Laser Laboratorium, Goettingen, Germany Insect (5 mm) global view. Magnification (10x) of the indicated frame in a): insect leg with hairs. Magnification (one more 10x) of ... Related Searches: hair removal

2.    IMID_Korea_2004_17-4_SLS1Rev2 Best match in this PDF  |  All matches in this PDF ... Laser Annealing Ludolf Herbst, Frank Simon*, Ulrich Rebhan, Rustem Osmanow, Burkhard Fechner Lambda Physik AG, Hans-Boeckler-Strasse 12, D-37079 Goettingen / Germany *MicroLas GmbH, Hans-Boeckler-Strasse 27, D-37079 Goettingen / Germany e-mail: lherbst@lambdaphysik.com Phone: +49 551 69380 Fax: +49 ... Related Searches: ela

3.    ExcimerLasersforSuper-HighNA193nmLithographyRev2  (PAGE 1 OF 7) ... Wolfgang Zschocke, Thomas Schmidt, Igor Bragin, Thomas Schroeder, Christian Reusch, Stefan Spratte Lambda Physik AG, Hans-Boeckler-Strae 12, D-37079 Goettingen, Germany Tel: +49 551 69380 Fax: + 49 551 68691 e-mail: paetzel@lambdaphysik.com ABSTRACT Excimer lasers are widely used as the light source ... Related Searches: 193 nm laser

4.    pdf_129 Best match in this PDF  |  All matches in this PDF Very recently we performed the first experiment utilizing velocity map imaging (VELMI) to study the reaction dynamics of the O(1 D) + D2 ---> OD + D system [3]. Despite the advantages of the crossed-beam imaging technique, there have been relatively few such studies'. Almost all have been performed ... Related Searches: lpx | 193 nm laser | lambda physik | edge isolation

5.    OLEreprintCOHERENTJul07  (PAGE 1 OF 2) ... nanostructures using direct laser machining, but this is often difficult or impossible with current laser technology. At the Laser-Laboratorium in Goettingen, Germany, we have built a unique laser system based on commercially available products that delivers the high-energy, short-pulsewidth, ultraviolet ...

6.    pdf_232  (PAGE 10 OF 16) ... EUV Microstepper. New Frontiers: 13.5 nm Extreme Ultraviolet Source Technology Uwe Stamm, XTREME technologies GmbH, Hans-Boeckler-Str. 27, D-37079 Goettingen, Germany

7.    OLEreprintCOHERENTJul07  (PAGE 2 OF 2) ... , high-speed, dry process with much lower costs than multistep alternatives, such as lithography. Peter Simon is based at the Laser-Laboratorium in Goettingen, Germany. For more information, e-mail psimon@llg.gwdg.de or see www.llg. gwdg.de/. Juergen Kolenda is market development manager at Coherent ...

8.    Coherent_Combo Best match in this PDF  |  All matches in this PDF ... of Lambda Physik reached a turning point just after the close of the fiscal year. We came to an agreement with the dissenting shareholders and the Goettingen court registered the squeeze-out on January 14, 2005, which resulted in Coherent acquiring all of the outstanding shares of Lambda Physik that ... Related Searches: paul meissner | lumenis | compex 201 | compex 205

9.    pdf_232  (PAGE 13 OF 16) ... to be ready with the light sources before high-volume manufacturing in 2009. Dr. Uwe Stamm, XTREME technologies GmbH, Hans-Boeckler-Str. 27, D-37079 Goettingen, Germany, Tel.: +49 551 6938 340 Fax: +49 551 6938 260 e-mail: ustamm@xtremetec.de References [1] Proceedings of 2nd International Symposium ...

10.    pdf_129  (PAGE 4 OF 8) ... : Standardized characterization of excimer laser radiation, Laser und Optoelektronik 30 (1), 66 (1998) K. Mann and B. Schfer, Laser Laboratorium Goettingen, Germany Fig. 3: Far-field profile of F2 laser computed from Fig. 2.

---

Search Suggestions: hair removal | 193 nm laser | ela

Page 1 2 3 4 of 4 | Next

Site Search by

Coherent Contact Information