Search Results

Refine
13 - 23 of 23 Products for 'heat sink with fan' Page 2 of 2 |

heat sink with fan

Genesis-Taipan-Series

Genesis-Taipan-Series

…output window: tolerance relative to the nominal center of the output window and perpendicular to the mounting plane.
5 Theoretical limit is >1 MHz; actual performance will be limited by the diode-driver (not included).
6 Air cooling available with appropriate heat sink and fans.

Genesis Taipan HD Series Datasheet 2016.pdf

Genesis Taipan HD Series Datasheet 2016.pdf

…1 Typical value.
2 Measured from the output face, negative value corresponds to a location inside the laser head.
3 Theoretical limit is >1 MHz; actual performance will be limited by the diode-driver (not included).
4 Air cooling available with appropriate heat sink and fans.

COHR OBIS ScientificRemote DS 0317 1.pdf

COHR OBIS ScientificRemote DS 0317 1.pdf

…Resistive Touchscreen
Audio Yes
Internal Power Supply Yes
OBIS Lasers that can be connected 1 to 6 lasers with power to optional 1 to 6 heat sink cooling fans
Host Computer Remote Control via USB2 USB 2.0, Mini B
Host Computer Remote Control via RS-2322 RS-232 115.2K, 8N1…

Genesis-Taipan-607-639-OEM

Genesis-Taipan-607-639-OEM

…inside the head; positive outisde.
4 Measured at the output window: tolerance relative to the nominal center of the output window and perpendicular to the mounting plane.
5 Air cooling available with appropriate heat sink and fans.
6 Includes collimator.
7 At rated power.

CUBE family DSrevD

CUBE family DSrevD


Cable, 8-Pin, I/O for Remote with leads (1 meter) Not Applicable x
Cable, 2-Pin, Power Connector with leads (1 meter) Not Applicable x
Heat Sink, includes Cooling Fan and Hardware Order Separately, Part #1193289
Laser Emission Indicator with Interlock Connector Order Separately,…

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

Sink
Temperature
The laser diode assembly that houses the FAP-B is mounted on a
finned heat sink. The TEC controls the temperature of the diode bars
in the FAP-B. Waste heat from the diode bars is transferred to the
passive heat sink.
The heat sink is cooled by fans

Paladin Advanced Preinstallation.book

Paladin Advanced Preinstallation.book

Sink
Temperature
The laser diode assembly that houses the FAP-B is mounted on a
finned heat sink. The TEC controls the temperature of the diode bars
in the FAP-B. Waste heat from the diode bars is transferred to the
passive heat sink.
The heat sink is cooled by fans

Coherent Magnum II Laser Operator's Manual

Coherent Magnum II Laser Operator's Manual

…efficiently dissipate the heat generated by the laser.
To allow proper ventilation, the fan should not be obstructed. In
addition, it is suggested that you operate the laser in an environment
in which there is normal aeration.
All Coherent lasers are designed with ESD protection;…

COHR OBIS LaserBox DS 0618 1.pdf

COHR OBIS LaserBox DS 0618 1.pdf

…of these features to the front panel controls and connectors. FEATURES & BENEFITS · Integrated five bay mount for OBIS lasers · Heat sinks and cooling fans · Modulation inputs for analog and digital for five lasers · USB and RS-232 interface for additional control from host computer · Coherent…

Quick Guide Compass 215M

Quick Guide Compass 215M

…between laser head and heat sink. Connect fan cable after extra connector (red top, dark bottom) has been removed. Complete assembled laser head on heat sink. Controller with DC Power Connector, analog interface and connector to digital controller. Assembled Controller with auto-start adapter, head…

Laser Focus World - January 2018

Laser Focus World - January 2018

…laser must be actively cooled, whereas many low-power lasers get by with passive cooling via either some sort of heat sink or just natural airflow (picture, for example, a lowly helium-neon laser resting in a lab mount with no obvious cooling mechanism in sight). Laser diodes (LDs) are a special…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions