Ask a Question
Coherent
Search Results
1 - 12 of 75 Products for 'heat sink with fan' Page 1 of 7 |

heat sink with fan

Genesis-Taipan-Series

Genesis-Taipan-Series

…±3 488 ±3 Output Power (mW) 1000, 2000 2000, 4000 3000, 5000 Spatial Mode Multimode Bandwidth (nm) 100:1 Direct Modulation5 Available Operating Diode Current (A) 1 MHz; actual performance will be limited by the diode-driver (not included). 6 Air cooling available with appropriate heat sink and fans.

Genesis-Taipan-Series

Genesis-Taipan-Series

…532 ±3 Output Power (mW) 3000, 5000 3000, 5000, 8000 10000 Spatial Mode Multimode Bandwidth (nm) 100:1 Direct Modulation5 Available Operating Diode Current (A) 1 MHz; actual performance will be limited by the diode-driver (not included). 6 Air cooling available with appropriate heat sink and fans.

COHR CUBE DS 0316 3.pdf

COHR CUBE DS 0316 3.pdf

CUBE Accessories 1073840 CUBE Heat Sink Accessory CUBE heat sink with fan, 127 x 66 x 44 mm 1079150 CUBE 2nd Emission Lamp CDRH lamp for laser emission. Connects to CUBE I/O cable. 1072166
*CUBE Interface Cable CUBE to control box, I/O, RS-232 and power 1072454
*CUBE Power Supply, 6 VDC, 2.5 amps…

COHR CUBE DS 0316 3.pdf

COHR CUBE DS 0316 3.pdf

CUBE Accessories 1073840 CUBE Heat Sink Accessory CUBE heat sink with fan, 127 x 66 x 44 mm 1079150 CUBE 2nd Emission Lamp CDRH lamp for laser emission. Connects to CUBE I/O cable. 1072166
*CUBE Interface Cable CUBE to control box, I/O, RS-232 and power 1072454
*CUBE Power Supply, 6 VDC, 2.5 amps…

COHR CUBE DS 0316 3.pdf

COHR CUBE DS 0316 3.pdf

CUBE Accessories 1073840 CUBE Heat Sink Accessory CUBE heat sink with fan, 127 x 66 x 44 mm 1079150 CUBE 2nd Emission Lamp CDRH lamp for laser emission. Connects to CUBE I/O cable. 1072166
*CUBE Interface Cable CUBE to control box, I/O, RS-232 and power 1072454
*CUBE Power Supply, 6 VDC, 2.5 amps…

Book.book

Book.book

…setting of 1 N·m (142 oz·in.). 5. If fan operation is required, connect the fan to the CUBE power supply with the cable provided with the heat sink. The fan cable will allow power to be supplied to the heat sink fan and the CUBE simultaneously. 6. Proceed with normal laser operation. Right Angle…

Book.book

Book.book

…setting of 1 N·m (142 oz·in.). 5. If fan operation is required, connect the fan to the CUBE power supply with the cable provided with the heat sink. The fan cable will allow power to be supplied to the heat sink fan and the CUBE simultaneously. 6. Proceed with normal laser operation. Right Angle…

Book.book

Book.book

…setting of 1 N·m (142 oz·in.). 5. If fan operation is required, connect the fan to the CUBE power supply with the cable provided with the heat sink. The fan cable will allow power to be supplied to the heat sink fan and the CUBE simultaneously. 6. Proceed with normal laser operation. Right Angle…

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…constant for improved stability. Mounted on a large TEC, the diode laser and optics remain at a constant temperature of 22°C. A heat sink with an internal fan removes the heat.The closed-loop, constant temperature keeps the wavelength constant, minimizes mode-hops and maintains power stability.…

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…constant for improved stability. Mounted on a large TEC, the diode laser and optics remain at a constant temperature of 22°C. A heat sink with an internal fan removes the heat.The closed-loop, constant temperature keeps the wavelength constant, minimizes mode-hops and maintains power stability.…

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

2011-Diode-Laser-Modules-and-Pattern-Generators-Catalog.pdf

…constant for improved stability. Mounted on a large TEC, the diode laser and optics remain at a constant temperature of 22°C. A heat sink with an internal fan removes the heat.The closed-loop, constant temperature keeps the wavelength constant, minimizes mode-hops and maintains power stability.…

CUBE 640FP DS

CUBE 640FP DS

…included). 6 Air cooling available with appropriate heat sink and fans. Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent's scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR…

Powered by Site Search powered by SLI Systems

Call 1-800-227-8840


Outside the U.S. 1-408-764-4983

Coherent has locations across the globe that are available to provide support for any product, service or inquiry.

Visit our Contact Page to connect with any of our global sites.


Corporate Headquarters
Coherent Inc.
5100 Patrick Henry Drive
Santa Clara, CA 95054 USA

email: tech.sales@coherent.com

Send Us a Message

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions