Ask a Question
Coherent

Search Results

Refine

Result Type

1 - 12 of 37 Products for 'heatsink sapphire' Page 1 of 4 |

heatsink sapphire

Sapphire-SF-Data-Sheet.pdf

Sapphire-SF-Data-Sheet.pdf

…(Beam Registering) LED (Emission Indicator) Connection to Controller (25pin SUB-D male) DC Supply for Fan (AMP-MODU-2pin-male) Interfacing Part (Heatsink) should have flatness <0.05 mm (0.002 in.) 4X M4 3.5 mm (0.14 in.) Beam Waist at Exit Window [3 mm (0.12 in.) inside from here] [±200 mm (7.9…

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

Sapphire LP CW Visible Lasers from Deep Blue to Orange 15 mm (0.6 in.) 17.9 mm (0.7 in.) 17.5 mm (0.69 in.) 6.1 mm (0.24 in.) 20.4 mm (0.8 in.) 11 mm (0.43 in.) 16.7 mm (0.66 in.) 0mm(0.0in.) 5.1mm(0.2in.) 21.1mm(0.8in.) 35.3mm(1.4in.) 62.6mm(2.5in.) 102.9mm(4.0in.) 112.4mm(4.4in.) 117.8mm(4.6in.)…

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

Lasers-for-Life-Sciences-Product-Guide FORMFIRST.pdf

Sapphire LP CW Visible Lasers from Deep Blue to Orange 15 mm (0.6 in.) 17.9 mm (0.7 in.) 17.5 mm (0.69 in.) 6.1 mm (0.24 in.) 20.4 mm (0.8 in.) 11 mm (0.43 in.) 16.7 mm (0.66 in.) 0mm(0.0in.) 5.1mm(0.2in.) 21.1mm(0.8in.) 35.3mm(1.4in.) 62.6mm(2.5in.) 102.9mm(4.0in.) 112.4mm(4.4in.) 117.8mm(4.6in.)…

Sapphire-LP-Data-Sheet.pdf

Sapphire-LP-Data-Sheet.pdf

…(Beam Registering) LED (Emission Indicator) Connection to Controller (25pin SUB-D male) DC Supply for Fan (AMP-MODU-2pin-male) Interfacing Part (Heatsink) should have flatness <0.05 mm (0.002 in.) Beam Waist at Exit Window [3 mm (0.12 in.) inside from here] [±200 mm (7.9 in.)] 4 Holes Ø4.0 mm (0.16…

Sapphire LPX Drawing.pdf

Sapphire LPX Drawing.pdf

34 6 Beam waist at exit window (3mm inside from here) ( 200mm) Interfacing Part (Heatsink) should have flatness <0.05mm 17,9 19 17,5 LED (Emission Indicator) Connection to Controller (25pin SUB-D male) DC Supply for fan (AMP-MODU-2pin-male) 5 10,1 115,6 120 125 55 70 7,5 15 110 45 Position of dowel…

Sapphire LPX Drawing.pdf

Sapphire LPX Drawing.pdf

34 6 Beam waist at exit window (3mm inside from here) ( 200mm) Interfacing Part (Heatsink) should have flatness <0.05mm 17,9 19 17,5 LED (Emission Indicator) Connection to Controller (25pin SUB-D male) DC Supply for fan (AMP-MODU-2pin-male) 5 10,1 115,6 120 125 55 70 7,5 15 110 45 Position of dowel…

Sapphire-SF-Data-Sheet.pdf

Sapphire-SF-Data-Sheet.pdf

…(Beam Registering) LED (Emission Indicator) Connection to Controller (25pin SUB-D male) DC Supply for Fan (AMP-MODU-2pin-male) Interfacing Part (Heatsink) should have flatness <0.05 mm (0.002 in.) 4X M4 3.5 mm (0.14 in.) Beam Waist at Exit Window [3 mm (0.12 in.) inside from here] [±200 mm (7.9…

Sapphire-SF-Data-Sheet.pdf

Sapphire-SF-Data-Sheet.pdf

…(Beam Registering) LED (Emission Indicator) Connection to Controller (25pin SUB-D male) DC Supply for Fan (AMP-MODU-2pin-male) Interfacing Part (Heatsink) should have flatness <0.05 mm (0.002 in.) 4X M4 3.5 mm (0.14 in.) Beam Waist at Exit Window [3 mm (0.12 in.) inside from here] [±200 mm (7.9…

Sapphire-LP-Data-Sheet.pdf

Sapphire-LP-Data-Sheet.pdf

…(Beam Registering) LED (Emission Indicator) Connection to Controller (25pin SUB-D male) DC Supply for Fan (AMP-MODU-2pin-male) Interfacing Part (Heatsink) should have flatness <0.05 mm (0.002 in.) Beam Waist at Exit Window [3 mm (0.12 in.) inside from here] [±200 mm (7.9 in.)] 4 Holes Ø4.0 mm (0.16…

Sapphire-LP-Data-Sheet.pdf

Sapphire-LP-Data-Sheet.pdf

…(Beam Registering) LED (Emission Indicator) Connection to Controller (25pin SUB-D male) DC Supply for Fan (AMP-MODU-2pin-male) Interfacing Part (Heatsink) should have flatness <0.05 mm (0.002 in.) Beam Waist at Exit Window [3 mm (0.12 in.) inside from here] [±200 mm (7.9 in.)] 4 Holes Ø4.0 mm (0.16…

COHR SapphireLPX Datasheet.pdf

COHR SapphireLPX Datasheet.pdf

…Part (Heatsink) should have flatness <0.05 mm (0.002 in.) Beam Waist at Exit Window [3 mm (0.12 in.) inside from here] [±200 mm (7.9 in.)] 4 Holes Ø4.0 mm (0.16 in.) for Screws M3, UNC/UNF No.5&6, 1/8-40 BSW/BSF or BA No.4&5 MECHANICAL SPECIFICATIONS Sapphire LPX Datasheet Sapphire LP Rear…

COHR SapphireLPX Datasheet.pdf

COHR SapphireLPX Datasheet.pdf

…Part (Heatsink) should have flatness <0.05 mm (0.002 in.) Beam Waist at Exit Window [3 mm (0.12 in.) inside from here] [±200 mm (7.9 in.)] 4 Holes Ø4.0 mm (0.16 in.) for Screws M3, UNC/UNF No.5&6, 1/8-40 BSW/BSF or BA No.4&5 MECHANICAL SPECIFICATIONS Sapphire LPX Datasheet Sapphire LP Rear…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions