Search Results

37 - 48 of 113 Products for 'humidity' Page 4 of 10 |

humidity

COHR DiamondFLQ DS 0218 4.pdf

COHR DiamondFLQ DS 0218 4.pdf

…(°C) 0 to 42 0 to 42 0 to 42 0 to 42 0 to 42
Storage Temperature (°C) -10 to 60 -10 to 60 -10 to 60 -10 to 60 -10 to 60
Operating Humidity (%) (RH non-condensing) 0 to 85 0 to 85 0 to 85 0 to 85 0 to 85
Warm-up Time (s) 60 60 60 60 60
Cooling10 Air-cooled Air-cooled Air-cooled…

COHR AVIA LX UV DS 0818 3.pdf

COHR AVIA LX UV DS 0818 3.pdf

…Non-Operation (storage)
+15 to 40°C (59 to 104°F)
-20 to +60°C (-4 to 140°F)
Shipping Specifications
Temperature
Relative Humidity (%)
-20 to +60°C (-4 to 140°F)
5 to 80
Optional Accessory
Beam Expander
Chiller
>2x
>110V and 230V

COHR FLARE NX DS 0817 2.pdf

COHR FLARE NX DS 0817 2.pdf


Operating 15 to 45°C (59 to 113°F)
Storage -20 to +50°C (-4 to 122°F)
Laser Head Heat Dissipation2 (W) <
_40
Relative Humidity (%) (non-condensing) <80
Dimensions (L x W x H)
Laser Head 155.6 x 93.5 x 38.25 mm (6.13 x 3.68 x 1.5 in.)
Controller 160 x 130…

COHR Monaco1035 DS 0318 5.pdf

COHR Monaco1035 DS 0318 5.pdf

…Power Supply
Non-Operation (storage)
+10 to 30°C (50 to 86°F)
-20 to +60°C (-4 to 140°F)
5 to 65°C (41 to 149°F)
Relative Humidity (%) <90, non-condensing
SHIPPING SPECIFICATIONS
Temperature -20 to +60°C (-4 to 140°F)
1 All specifications at maximum energy.…

COHR Monaco517 DS 0318 4.pdf

COHR Monaco517 DS 0318 4.pdf

…Power Supply
Non-Operation (storage)
+10 to 30°C (50 to 86°F)
-20 to +60°C (-4 to 140°F)
5 to 65°C (41 to 149°F)
Relative Humidity (%) <90, non-condensing
SHIPPING SPECIFICATIONS
Temperature -20 to +60°C (-4 to 140°F)
1 All specifications at maximum energy.…

COHR MonacoSmartCleave DS 0318 4.pdf

COHR MonacoSmartCleave DS 0318 4.pdf

…Power Supply
Non-Operation (storage)
+10 to 30°C (50 to 86°F)
-20 to +60°C (-4 to 140°F)
5 to 65°C (41 to 149°F)
Relative Humidity (%) <90, non-condensing
SHIPPING SPECIFICATIONS
Temperature -20 to +60°C (-4 to 140°F)
1 All specifications at maximum energy.…

RAPID-FX-Data-Sheet-06-17-15.pdf

RAPID-FX-Data-Sheet-06-17-15.pdf

…(59 to 86°F)
Power Supply +15 to 30°C (59 to 86°F)
Shipping Specifications
Temperature -10 to +50°C (-14 to 122°F)
Relative Humidity (%) 5 to 90
1 Repetition rate set at factory.
2 Assuming a sech2 fit.
3 For 1000 consecutive pulses.
RAPID-F Thermal Stability…

Avia preinstall.book

Avia preinstall.book


Ambient operating temperature
10ºC to 35°C (50 to 95°F) for water cooled
10ºC to 25ºC (50 to 77ºF) for air cooled
Relative humidity 5 to 90% (non-condensing)
Altitude Sea level to 10,000 feet (3,000 m)
Note: All specifications and requirements are subject to change…

Coherent BioRay Operator's Manual

Coherent BioRay Operator's Manual

…normally when the following environmental conditions are met:
· Altitudes up to 2000 m.
· Environments where the maximum relative humidity (RH) is
80% (for temperatures up to 31°C). Note: Above 31°C, the RH
decreases linearly from 80 to 50% (at 50°C).
· The operating…

FieldMaxII-TO User Manual

FieldMaxII-TO User Manual

…Measurement Resolution ± 0.1% of full scale
Environmental
Altitude
4,500 m (operating)
< 12,000 m (storage)
Relative Humidity
< 90% (5 to 40° C) (operating)
< 95% (0 to 70° C) (storage)
Temperature
5 to 40° C (operating)
-20 to 70° C…

Genesis-Taipan-Series

Genesis-Taipan-Series

…<32 <36, <40
Diode Voltage (V) 1.5 to 2.2
Cooling Requirements6 Active cooling required
Case Temperature (°C) 25 ±2
Humidity Non-condensing
Dimensions (L x W x H)
Laser Head 121 x 44 x 68 mm (4.75 x 1.73 x 2.68 in.)
Weight
Laser Head (g) 730 ±10

Genesis Taipan HD Series Datasheet 2016.pdf

Genesis Taipan HD Series Datasheet 2016.pdf

…<32 <29 <33
Diode Voltage (V) 1.5 to 2.2
Cooling Requirements4 Active cooling required
Case Temperature (°C) 25 ±2
Humidity Non-condensing
Dimensions (L x W x H)
Laser Head 134.14 x 44 x 64.47 mm (5.28 x 1.73 x 2.54 in.)
Weight
Laser Head (g) 730 ±10…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions