Ask a Question
Coherent

Search Results

Refine

Result Type

37 - 48 of 59 Products for 'hyper rapid 25' Page 4 of 5 |

hyper rapid 25

COHR HyperRapid50 DS 0716 4.pdf

COHR HyperRapid50 DS 0716 4.pdf

…Humidity <60%, non-condensing Shipping Specifications Temperature +5°C to +50°C (41°F to 122°F) Relative Humidity 10 to 90%, non-condensing 1 Specified at default repetition rate = 500 kHz for Hyper Rapid 50 and 250 kHz for Hyper Rapid 50 HE. 2 Transformer can be provided for 110V or 208V operation.

COHR HyperRapid50 DS 0716 4.pdf

COHR HyperRapid50 DS 0716 4.pdf

…Humidity <60%, non-condensing Shipping Specifications Temperature +5°C to +50°C (41°F to 122°F) Relative Humidity 10 to 90%, non-condensing 1 Specified at default repetition rate = 500 kHz for Hyper Rapid 50 and 250 kHz for Hyper Rapid 50 HE. 2 Transformer can be provided for 110V or 208V operation.

Picosecond laser

Picosecond laser

RAPID, HYPER RAPID 10 of 31 l Provide adequate electrical power plugs (if deviating from the described ones above) or contactors, which are sufficiently fused (refer to next chapter). l Laser safety requirements must always be satisfied. Certified laser eye protection has to be worn by every person…

Picosecond laser

Picosecond laser

RAPID, HYPER RAPID 10 of 31 l Provide adequate electrical power plugs (if deviating from the described ones above) or contactors, which are sufficiently fused (refer to next chapter). l Laser safety requirements must always be satisfied. Certified laser eye protection has to be worn by every person…

COHR HyperRapid100 AOM DS 0716 4.pdf

COHR HyperRapid100 AOM DS 0716 4.pdf

High Power Industrial ps-Laser System Specifications HYPER RAPID 100 AOM 355-SW Center Wavelength (nm) 1064 532 355 Maximum Average Power (W) 90 38 30 Output Repetition Rate (kHz) 0 to 1000 Spatial Mode TEM00 (M2 >100:1 Beam Diameter (µm)(typical) 2650 2100 2100 Beam Divergence, Full Angle (mrad) 85…

COHR HyperRapid50 355-SW DS 0716 3.pdf

COHR HyperRapid50 355-SW DS 0716 3.pdf

25 24 500 90 16 15 Operating Specifications Temperature +15°C to 27°C (59°F to 80°F) Relative Humidity <60%, non-condensing Shipping Specifications Temperature +5°C to +50°C (41°F to 122°F) Relative Humidity 10 to 90%, non-condensing 1 Specified at default repetition rate = 500 kHz for Hyper Rapid

Picosecond laser

Picosecond laser

…Shutter" on page 23 29 Status connecter (potential-free), provides laser status signals, see section "Status connecter" on page 25 30 Ground connection of the power supply 31 Timing - connecter for HV switch in the laser head 32 connecter for HV cable (high voltage) 21 of 31 RAPID, HYPER RAPID

Picosecond laser

Picosecond laser

…Shutter" on page 23 29 Status connecter (potential-free), provides laser status signals, see section "Status connecter" on page 25 30 Ground connection of the power supply 31 Timing - connecter for HV switch in the laser head 32 connecter for HV cable (high voltage) 21 of 31 RAPID, HYPER RAPID

Picosecond laser

Picosecond laser

HYPER RAPID 10 of 27 l Laser safety requirements must always be satisfied. Certified laser eye protection has to be worn by every person working with or in vicinity of the laser. Involved persons have to be aware of and informed about hazards associated with laser radiation. l In case the system is…

Picosecond laser

Picosecond laser

HYPER RAPID 10 of 27 l Laser safety requirements must always be satisfied. Certified laser eye protection has to be worn by every person working with or in vicinity of the laser. Involved persons have to be aware of and informed about hazards associated with laser radiation. l In case the system is…

Picosecond laser

Picosecond laser

…of the laser head, cable lengths, separating the power supplies, electrical plugs etc. Check the mains voltage switch of the chiller (Rapid series). The Hyper Rapid series comes with a chiller with fixed voltage of 230V. Principal signal configurations There are certain constellations concerning…

AVIA 355-28 DS

AVIA 355-28 DS

HYPER RAPID 50 High Power Industrial Picosecond Laser VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IV LASER PRODUCT. DIN EN 60825-1/10.2003 CLASSIFIED. Printed in the U.S.A. MC-023-13-0M0114Rev.A Copyright ©2014 Coherent, Inc.…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions