Ask a Question
Coherent

Search Results

13 - 24 of 58 Products for 'hyper rapid 50' Page 2 of 5 |

hyper rapid 50

Picosecond laser

Picosecond laser

…power supply units. Supply unit Dimension (W x D x H) Weight Height Power supply P90 for Hyper Rapid 25, 50, 75, 100 485 x 555 x 400 mm 19 x 21.9 x 15.8 inches 55 kg / 121 lbs 9 U Chiller P320 for Hyper Rapid 25, 50, 75, 100 485 x 600 x 400 mm 19 x 23.6 x 15.8 inches 65 kg / 143 lbs 9 U External AOM…

Picosecond laser

Picosecond laser

RAPID, HYPER RAPID 20 of 31 Figure 3: Schematical design of the laser system optional freq.-conversion, software-switchable Connecters Rapid The connecters for the Rapid, Rapid 10 are located on the rear side of the power supply P60: Figure 4: Power supply P60, rear side 1 CPC connecter water in…

COHR HyperRapid50 DS 0716 4.pdf

COHR HyperRapid50 DS 0716 4.pdf

…beams The HYPER RAPID 50 is a powerful industrial ps-laser offering pulse-on-demand and burst mode operation at output powers up to 50W for high quality micromachining at high throughput.With this laser, the total cost per watt ratio for ps-laser pulses is significantly reduced. The HYPER RAPID 50

COHR HyperRapid50 DS 0716 4.pdf

COHR HyperRapid50 DS 0716 4.pdf

…Humidity <60%, non-condensing Shipping Specifications Temperature +5°C to +50°C (41°F to 122°F) Relative Humidity 10 to 90%, non-condensing 1 Specified at default repetition rate = 500 kHz for Hyper Rapid 50 and 250 kHz for Hyper Rapid 50 HE. 2 Transformer can be provided for 110V or 208V operation.

Picosecond laser

Picosecond laser

RAPID, HYPER RAPID 22 of 31 Connecters Hyper Rapid The connecters for the Hyper Rapid are located on the rear side of the power supply P90: Figure 5: Power supply P90, rear side 1 CPC connecter water in from laser head 2 Laser diodes with fiber coupler 3 Mains power cable (230 VAC, 50-60 Hz) 4 no…

Picosecond laser

Picosecond laser

September 2016 1303865 Hyper Rapid NX Chiller: (SMC HRS024-A-20) water-air kit consisting of: 1302846 Chiller, Air-Cooled, 2100/2400 W (50/60 Hz), 200-230 VAC Single Phase, Rc1/2 ports (for the internal cooling circuit) Dimension (W x H x D): 377 x 615 x 500 mm 1304332 Blue Hose Assembly, 5.0 m 1/2"…

COHR HyperRapid50 DS 0716 4.pdf

COHR HyperRapid50 DS 0716 4.pdf

…Humidity <60%, non-condensing Shipping Specifications Temperature +5°C to +50°C (41°F to 122°F) Relative Humidity 10 to 90%, non-condensing 1 Specified at default repetition rate = 500 kHz for Hyper Rapid 50 and 250 kHz for Hyper Rapid 50 HE. 2 Transformer can be provided for 110V or 208V operation.

Picosecond laser

Picosecond laser

…recommended. System name Device name Voltage Power consumption (average) Hyper Rapid 25 power supply P90 230V
* 1100 W Hyper Rapid 50 power supply P90 230V
* 1300 W Hyper Rapid 75 power supply P90 230V
* 1500 W Hyper Rapid 100 power supply P90 230V
* 1600 W
* Please communicate your mains voltage…

Picosecond laser

Picosecond laser

…µJ 200-1000 IR, SHG, THG AOM Hyper Rapid 50 50 W 125 µJ 400-1000 IR, SHG, THG AOM Hyper Rapid 50-HE (high energy) 50 W 200 µJ 200-500 specified; up to 1000 IR, SHG, THG AOM Hyper Rapid 75 75 W 150 µJ 400-1000 IR, SHG, THG AOM Hyper Rapid 100 100 W 250 µJ 400-1000 IR, SHG, THG AOM 5 of 27 HYPER RAPID

Picosecond laser

Picosecond laser

…fuses 230 V, 4 A, slow Input EOM-Gate BNC connecter (input) for 5 V TTL Gate signal (internal resistance of 2 k). Range: 0 - 2001000 kHz; on delivery connected to a USB port in order to constantly open the Gate. Replace the BNC cable if you want to operate the Gate. 27 of 31 RAPID, HYPER RAPID

COHR HyperRapid50 DS 0716 4.pdf

COHR HyperRapid50 DS 0716 4.pdf

…beams The HYPER RAPID 50 is a powerful industrial ps-laser offering pulse-on-demand and burst mode operation at output powers up to 50W for high quality micromachining at high throughput.With this laser, the total cost per watt ratio for ps-laser pulses is significantly reduced. The HYPER RAPID 50

COHR HyperRapid50 DS 0716 4.pdf

COHR HyperRapid50 DS 0716 4.pdf

…beams The HYPER RAPID 50 is a powerful industrial ps-laser offering pulse-on-demand and burst mode operation at output powers up to 50W for high quality micromachining at high throughput.With this laser, the total cost per watt ratio for ps-laser pulses is significantly reduced. The HYPER RAPID 50

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions