1 - 10 of 348 Search Results for infrared
|
|
|
1.
Continuous-Wave (CW)
|
|
10W, and wavelengths in the infrared, visible and ultraviolet are available."> Continuous-Wave (CW) Solid-State Diode-Pumped Laser Systems Output power from 10 mW to >10W, with wavelengths in the IR, visible and UV. DPSS lasers enable the following applications: Ultrafast pumping Ti:Sapphire ...
Related Searches: 405nm laser | 532 nm | 488nm | 532nm
|
|
|
|
|
3.
Tunable
|
|
Tunable For broadband applications through single-frequency, high-res. studies. Superior Reliability & Performance Lasers and Laser-based Systems Laser Measurement and Control Precision Optics Related Accessories Coherent is the undisputed leader in the field of high-power, tunable CW lasers for ...
Related Searches: mbr110 | 899 | mbr-110 | tunable
|
|
|
|
4.
HVP_articleRev2
(PAGE 4 OF 4)
|
|
|
... and beyond, although the optical portion only encompasses the ultraviolet (0.3 to 0.4 microns [µm]), the visible spectrum (0.4 to 0.7 µm) and the infrared (0.7 to 30 µm) Noise: An undesired disturbance in a laser beam that interferes with its normal performance or function. Too much noise can cause ...
|
|
|
|
|
5.
Laser_Spot_Welding_PlasticRev2
(PAGE 1 OF 2)
|
|
|
Laser Spot-Welding of Plastics Introduction The use of high-power near-infrared diode lasers for joining plastics is growing. More development work is being performed in institutions and in R&D labs, and applications in industry are slowly increasing. Several different approaches are being developed ...
|
|
|
|
|
6.
MDDI_207
(PAGE 1 OF 3)
|
|
|
... a diode-pumped solid-state (DPSS) laser, and it produces rapidly pulsed output. DPSS lasers are available with an output wavelength of 1064 nm (near infrared), 532 nm Figure 1. (click to enlarge) Laser micromachining can create marks by using either a direct-write or a mask-based process. Because of ...
|
|
|
|
|
7.
LasersBestPresc_0402
(PAGE 4 OF 8)
|
|
|
... in marking, but most use straightforward solid state Nd:Yag lasers, emitting a standard wavelength of 1.06 m, or CO2 lasers operating in the far infrared portion of the electromagnetic spectrum at 10.6 m. The more interesting applications involve using much shorter wavelength UV light to make indelible ...
|
|
|
|
|
8.
CompactSourcesGiveBespokeWavelengths
(PAGE 1 OF 3)
|
|
|
... output wavelength is determined by the characteristics of the quantum wells in the VCSEL structure, whichcanbeoptimizedforanywavelength in the near-infrared. Efficient intracavity doubling then enables the final output wavelength to be set anywhere throughout the visible spectrum. AsignificantadvantageofOPSLtechnology ...
|
|
|
|
|
9.
MDDI_207
(PAGE 2 OF 3)
|
|
|
... highly miniaturized marks on metals and plastics, theory and experience indicate that the best results are achieved with an ultraviolet DPSS laser. Infrared and visible lasers micromachine surfaces by acting as an intense local heat source that essentially boils off material. This can result in significant ...
|
|
|
|
|
10.
LasersInMedDevManf_EO
|
Best match in this PDF
|
All matches in this PDF
|
... being incorporated into devices for chronic conditions. A company called Multi Raydiance Medical has combined a 25,000mW super pulsed laser, pulsed infrared, red light and a 40th anniversary issue electro optics Pulsed solid-state lasers are especially suitable for closing the titanium housings of pacemakers ...
Related Searches: pdt | nd yag laser
|
|
Coherent Contact Information