Ask a Question
Coherent
Search Results
25 - 36 of 96 Products for 'innova sabre motofred' Page 3 of 8 |

innova sabre motofred

00 SabreMFreD Preinstall.book

00 SabreMFreD Preinstall.book

…Coherent Technical Support at 800-367-7890 for more information on how this equipment can be used with your Innova Sabre MotoFreD Ion Laser. Output Power Measurements The Innova Sabre ion laser has a built-in power monitor which reports the laser output power through the LCD on the remote control…

00 SabreMFreD Preinstall.book

00 SabreMFreD Preinstall.book

Innova Sabre MotoFreD Ion Laser Operator's Manual 2 In order to achieve the laser's specified input voltage, European installations normally use a Transformer. The Innova Sabre MotoFreD ion laser power cord is suitable for connection to a transformer, but should not be directly connected to a AC…

00 SabreMFreD Preinstall.book

00 SabreMFreD Preinstall.book

…Dimensions Table 7. Operating Tube Voltage/Current Range LASER MODELS NOMINAL TUBE VOLTAGE AT MAXIMUM TUBE CURRENT MAXIMUM TUBE CURRENT Innova Sabre MotoFreD 534 65 The above specifications subject to change without notice. Table 8. System Weights LASER HEAD POWER SUPPLY HEAT EXCHANGER CRATED 215…

00 SabreMFreD Preinstall.book

00 SabreMFreD Preinstall.book

Innova Sabre MotoFreD Ion Laser Operator's Manual 14 Figure 3. Laser Head and Remote Dimensions LASER EMISSION 2.54 cm (1.00") 8.28 cm (3.26") 9.09 cm (3.58"± .13 20.32 cm (8.00") 11.15 cm (4.39")±.38 10.77 cm (4.24" ± .13) 19.05 cm (7.50") 15.24 cm (6.00") 2.5 cm (1.0") 256.0 cm (100.79") 74.7 cm…

00 SabreMFreD Preinstall.book

00 SabreMFreD Preinstall.book

Innova Sabre MotoFreD Ion Laser Operator's Manual 2 In order to achieve the laser's specified input voltage, European installations normally use a Transformer. The Innova Sabre MotoFreD ion laser power cord is suitable for connection to a transformer, but should not be directly connected to a AC…

00 SabreMFreD Preinstall.book

00 SabreMFreD Preinstall.book

…Dimensions Table 7. Operating Tube Voltage/Current Range LASER MODELS NOMINAL TUBE VOLTAGE AT MAXIMUM TUBE CURRENT MAXIMUM TUBE CURRENT Innova Sabre MotoFreD 534 65 The above specifications subject to change without notice. Table 8. System Weights LASER HEAD POWER SUPPLY HEAT EXCHANGER CRATED 215…

00 SabreMFreD Preinstall.book

00 SabreMFreD Preinstall.book

Innova Sabre MotoFreD Ion Laser Operator's Manual 14 Figure 3. Laser Head and Remote Dimensions LASER EMISSION 2.54 cm (1.00") 8.28 cm (3.26") 9.09 cm (3.58"± .13 20.32 cm (8.00") 11.15 cm (4.39")±.38 10.77 cm (4.24" ± .13) 19.05 cm (7.50") 15.24 cm (6.00") 2.5 cm (1.0") 256.0 cm (100.79") 74.7 cm…

00 SabreMFreD Preinstall.book

00 SabreMFreD Preinstall.book

Innova Sabre MotoFreD Ion Laser Operator's Manual 2 In order to achieve the laser's specified input voltage, European installations normally use a Transformer. The Innova Sabre MotoFreD ion laser power cord is suitable for connection to a transformer, but should not be directly connected to a AC…

00 SabreMFreD Preinstall.book

00 SabreMFreD Preinstall.book

…Dimensions Table 7. Operating Tube Voltage/Current Range LASER MODELS NOMINAL TUBE VOLTAGE AT MAXIMUM TUBE CURRENT MAXIMUM TUBE CURRENT Innova Sabre MotoFreD 534 65 The above specifications subject to change without notice. Table 8. System Weights LASER HEAD POWER SUPPLY HEAT EXCHANGER CRATED 215…

00 SabreMFreD Preinstall.book

00 SabreMFreD Preinstall.book

Innova Sabre MotoFreD Ion Laser Operator's Manual 14 Figure 3. Laser Head and Remote Dimensions LASER EMISSION 2.54 cm (1.00") 8.28 cm (3.26") 9.09 cm (3.58"± .13 20.32 cm (8.00") 11.15 cm (4.39")±.38 10.77 cm (4.24" ± .13) 19.05 cm (7.50") 15.24 cm (6.00") 2.5 cm (1.0") 256.0 cm (100.79") 74.7 cm…

00 SabreMFreD Preinstall.book

00 SabreMFreD Preinstall.book

…three phase 480 VAC in WYE configuration, with no neutral and the yellow/green wire to building ground. There is no neutral connection. The Innova Sabre MotoFreD ion laser system will operate with either 60 Hz or 50 Hz line frequency. Electrical power must meet the specifications in Table 1. The…

00 SabreMFreD Preinstall.book

00 SabreMFreD Preinstall.book

…three phase 480 VAC in WYE configuration, with no neutral and the yellow/green wire to building ground. There is no neutral connection. The Innova Sabre MotoFreD ion laser system will operate with either 60 Hz or 50 Hz line frequency. Electrical power must meet the specifications in Table 1. The…

Powered by Site Search powered by SLI Systems

Call 1-800-227-8840


Outside the U.S. 1-408-764-4983

Coherent has locations across the globe that are available to provide support for any product, service or inquiry.

Visit our Contact Page to connect with any of our global sites.


Corporate Headquarters
Coherent Inc.
5100 Patrick Henry Drive
Santa Clara, CA 95054 USA

email: tech.sales@coherent.com

Send Us a Message

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions