Ask a Question
Coherent
Search Results
37 - 43 of 43 Products for 'ir attenuator' Page 4 of 4 |

ir attenuator

Photonics Spectra - July 2014

Photonics Spectra - July 2014

…also have a fast response time and thus can be useful for looking at pulse shapes. However, they saturate above approximately 1 mW/cm2 , so attenuating filters must be used when operating at higher powers. The main drawbacks of photodiodes are that they have smaller active areas, a much more…

COHR HyperRapidNX DS 1016revA 7.pdf

COHR HyperRapidNX DS 1016revA 7.pdf

…HyperRapid NX delivers up to 250 µJ pulse energy with typically 10 ps duration at repetition rates up to 1 MHz. Output powers are up to 100W in the IR, 50W in the visible and 30W in the UV. These performances allow to simultaneously feed 2 work stations within one machine, further reducing the TCO…

Photonics Spectra - July 2014

Photonics Spectra - July 2014

…also have a fast response time and thus can be useful for looking at pulse shapes. However, they saturate above approximately 1 mW/cm2 , so attenuating filters must be used when operating at higher powers. The main drawbacks of photodiodes are that they have smaller active areas, a much more…

Photonics Spectra - July 2014

Photonics Spectra - July 2014

…also have a fast response time and thus can be useful for looking at pulse shapes. However, they saturate above approximately 1 mW/cm2 , so attenuating filters must be used when operating at higher powers. The main drawbacks of photodiodes are that they have smaller active areas, a much more…

COHR HyperRapid NX DS 0117 9.pdf

COHR HyperRapid NX DS 0117 9.pdf

…innovations. HyperRapid NX delivers over 250 µJ pulse energy with 10 ps duration at repetition rates up to 1 MHz. Output power is over 100W in the IR, 50W in the visible and 30W in the UV. These performance levels help reducing the Total Cost of Ownership for a production process in micromachining…

COHR HyperRapid NX DS 0117 9.pdf

COHR HyperRapid NX DS 0117 9.pdf

…innovations. HyperRapid NX delivers over 250 µJ pulse energy with 10 ps duration at repetition rates up to 1 MHz. Output power is over 100W in the IR, 50W in the visible and 30W in the UV. These performance levels help reducing the Total Cost of Ownership for a production process in micromachining…

COHR HyperRapid NX DS 0117 2.pdf

COHR HyperRapid NX DS 0117 2.pdf

…HYPER RAPID NX delivers up to 250 µJ pulse energy with typically 10 ps duration at repetition rates up to 1 MHz. Output power is up to 100W in the IR, 50W in the visible and 30W in the UV. These outstanding performances help reducing the TCO for a production process in micromachining applications,…

Powered by Site Search powered by SLI Systems

Call 1-800-227-8840


Outside the U.S. 1-408-764-4983

Coherent has locations across the globe that are available to provide support for any product, service or inquiry.

Visit our Contact Page to connect with any of our global sites.


Corporate Headquarters
Coherent Inc.
5100 Patrick Henry Drive
Santa Clara, CA 95054 USA

email: tech.sales@coherent.com

Send Us a Message

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions