---

1.    cqeofiDS Best match in this PDF  |  All matches in this PDF D I A M O N D CO2 Laser TechnologyCQE,OFIAccessories The Cut Quality EnhancerTM (CQE) and the Optical Feedback Isolator (OFI) are bolt-on modules that significantly increase the material processing capabilities of Coherent's DIAMONDTM CO2 lasers and protect the lasers from back-reflections-- while ... Related Searches: polarizer | co2 laser price

2.  K-Series 10-Micron ... and in Flexography to engrave printing rolls Customers may equip their K-series laser with accessories such as a Polarizer, Circularizer Isolator and Power monitor. Accessories 1098407 PM150 Air-Cooled Thermopile Sensors to 150W (RoHS) 1098509 PM300F-19 Fan-Cooled Thermopile Sensors to 300W (RoHS ... Related Searches: micron

3.  Kiss Cutting of Adhesive-Backed Paper with a CO 2 Laser ... no damage to the backing layer. Laser Used: G-Series Process: The 10.6-µm output beam from a Coherent G-150 CO 2 laser was sent through an optical isolator and a circular polarizer before being expanded by a 2X Keplerian telescope. A 62-mm lens was used to give a theoretical spot size of 70 µm at ... Related Searches: paper cutting | laser engraving | g150 | cutting

4.  Thin Glass Cutting by Crack Propagation with a CO 2 Laser ... or highly curved cuts. Laser Used: G-Series Process: The beam from a Coherent G-100 laser was sent through a cylindrical correcting lens, an optical isolator and a circular polarizer before being delivered to a 2X Keplerian telescope. The beam was then sent to a 190 mm focal length cylindrical lens ... Related Searches: laser glasses | laser scribing of solar panels | glass cutting | g-100

5.  Thin-Film Thermoplastic Cutting with a 150-W CO 2 Laser ... Process: The output beam from a Coherent G-150 CO 2 laser, operating at 150W at 10.6-µm, was sent through a cylindrical correcting lens, an optical isolator and a circular polarizer. A beam expander was then used to transform the beam to a 16-mm diameter. A 63-mm focal length focusing lens, mounted ... Related Searches: g 150 | diamond | thin film | laser engraving

6.    Diamond_Integrators_Guide_RevAA  (PAGE 34 OF 56) ... optics so that they are destroyed. It is essential for GEM-series laser systems used in high beam return (back reflection) modes, to have an optical isolator in the beam delivery system. An isolator is a mirror with a coating that reflects S-polarized light (light polarized normal to the plane of reflection ...

7.    Diamond_Integrators_Guide_RevAA  (PAGE 35 OF 56) Beam Delivery 29 isolators referred to are for operation at 10.6 m. For operation at 9.4 m use CQE part number 0175-989-01 and isolator part number 0175-990-01. Damage to the laser due to back reflection is not covered by warranty, so the system designer should protect against it. Figure 12. Installation ...

8.    Diamond_Integrators_Guide_RevAA  (PAGE 53 OF 56) ... 45 Material processing 3 Mirages 26 Moving Beam seals 26 Beam system 21 Laser 22 O OEM interface 38 OEM package 14 Operating controls 10 Optical isolator 28 Optics basics 30 P Performance 7 Performance package 15 Polarization 27

9.    cqeofiDS  (PAGE 1 OF 2) D I A M O N D CO2 Laser Technology CQE, OFI Accessories The Cut Quality EnhancerTM (CQE) and the Optical Feedback Isolator (OFI) are bolt-on modules that significantly increase the material processing capabilities of Coherent's DIAMONDTM CO2 lasers and protect the lasers from back-reflections-- while ...

10.    cqeofiDS  (PAGE 2 OF 2) ... Germany +49 (6071) 9680 UK +44 (1223) 228 800 CQE, OFI Accessories D I A M O N D CO2 Laser Technology TM CIRCULAR POLARIZER (CQE) OPTICAL FEEDBACK ISOLATOR (OFI)

---

Search Suggestions: polarizer | micron | k500 | 9 micron | co2 laser price | aiming beam | beam bender | diamond | beam delivery

Page 1 2 3 of 3 | Next

Site Search by

Coherent Contact Information