Ask a Question
Coherent

Search Results

Refine

Result Type

1 - 12 of 105 Products for 'j2 manual' Page 1 of 9 |

j2 manual

DIAMOND J-2 Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-2 Series OEM Lasers Preinstallation Manual, Rev. AA

Preinstallation Manual DIAMONDTM J-2 Series OEM Lasers 1280 Blue Hills Avenue Bloomfield, CT 06002

DIAMOND J-2 Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-2 Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-2 Series OEM Lasers Preinstallation Manual 2 - 2 a. Output End Isometric View b. Interface End Isometric View Figure 2-5. J-2 Series Laser

DIAMOND J-2 Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-2 Series OEM Lasers Preinstallation Manual, Rev. AA


*1278816 AA
* DIAMONDTM J-2 Series OEM Lasers Preinstallation Manual ©Coherent Inc., 10/2015 (RoHS), printed in the USA or Thailand Part No. 1278816 Rev. AA

DIAMOND J-2 Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-2 Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMONDTM J-2 Series OEM Lasers Preinstallation Manual ©Coherent Inc., 10/2015 (RoHS), printed in the USA or Thailand Part No. 1278816 Rev. AA
*1278816 AA
*

DIAMOND J-2 Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-2 Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-2 Series OEM Lasers Preinstallation Manual 1 - 6 Labeling Figure 1-2 shows the positions of all the labels located on the DIAMOND J-2 Series laser systems. . a. Output End b. Interface End Figure 1-2. Label Placement 1 2 3 4 8 6 5 3 4 7 8

DIAMOND J-2 Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-2 Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-2 Series OEM Lasers Preinstallation Manual 1 - 8 4 - High Current Hazard Warning Label 5 - Drainage Warning Label 6 - Coolant Requirement Warning Label 7 - Tipping Warning Label Figure 1-3. Labels (Continued) WARNING HIGH CURRENT HAZARD. ASSURE CORRECT DC POLARITY AND CABLE CURRENT RATING.

DIAMOND J-2 Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-2 Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-2 Series OEM Lasers Preinstallation Manual 2 - 12 Laser Dimensional Drawings The laser dimensions and required clearance are shown in Figure 2-9. Note that the clearance dimensions given for interface connections and service access are minimums. Increasing the clearance dimensions will…

DIAMOND J-2 Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-2 Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-2 Series OEM Lasers Preinstallation Manual 3 - 20 Option One: Forklift Method 1. Cut and remove any/all banding that holds the box(es) to the skid (Figure 3-6). If the laser system is significantly below room temperature, it is recommended that the laser system equilibrate to room…

DIAMOND J-2 Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-2 Series OEM Lasers Preinstallation Manual, Rev. AA

DIAMOND J-2 Series OEM Lasers Preinstallation Manual 3 - 22 3. Unfold the side of the box (Figure 3-8). Remove, do not discard, the foam caps on each end of the laser. Figure 3-8. Unfold the Side of the Box and Remove Foam End Caps

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions