Ask a Question
Coherent
Search Results
37 - 48 of 820 Products for 'labmax to manual' Page 4 of 69 |

labmax to manual

LabMax UserManualAddendum V00-63-41 .fm

LabMax UserManualAddendum V00-63-41 .fm

LabMax User Manual Addendum Page 3 of 16 Installation The ActiveX control and low-level DDL are automatically installed--along with the LabMax PC Applications software--when you run the CD that is supplied with the meter. LabMax Low Level Control Overview The LabMax Low Level Control…

LabMax UserManualAddendum V00-63-41 .fm

LabMax UserManualAddendum V00-63-41 .fm

LabMax User Manual Addendum Page 8 of 16 Outputs: oSerialNumber--a BSTR holding the serial number of the addressed meter. It will be an empty string if an invalid meter is addressed. Because this property takes an input parameter, it can appear differently when used by VB.Net and LabVIEW. For…

LabMax UserManualAddendum V00-63-41 .fm

LabMax UserManualAddendum V00-63-41 .fm

LabMax User Manual Addendum Page 8 of 16 Outputs: oSerialNumber--a BSTR holding the serial number of the addressed meter. It will be an empty string if an invalid meter is addressed. Because this property takes an input parameter, it can appear differently when used by VB.Net and LabVIEW. For…

LabMax UserManualAddendum V00-63-41 .fm

LabMax UserManualAddendum V00-63-41 .fm

LabMax User Manual Addendum Page 8 of 16 Outputs: oSerialNumber--a BSTR holding the serial number of the addressed meter. It will be an empty string if an invalid meter is addressed. Because this property takes an input parameter, it can appear differently when used by VB.Net and LabVIEW. For…

LabMax UserManualAddendum V00-63-41 .fm

LabMax UserManualAddendum V00-63-41 .fm

LabMax User Manual Addendum Page 10 of 16 ConnectToMeter The ConnectToMeter method connects to the addressed meter if the communication mode is RS-232 or GPIB. If the communication mode is RS-232, it uses the settings as defined by the RS232Settings property. If the communication mode is USB, this…

LabMax UserManualAddendum V00-63-41 .fm

LabMax UserManualAddendum V00-63-41 .fm

LabMax User Manual Addendum Page 10 of 16 ConnectToMeter The ConnectToMeter method connects to the addressed meter if the communication mode is RS-232 or GPIB. If the communication mode is RS-232, it uses the settings as defined by the RS232Settings property. If the communication mode is USB, this…

LabMax UserManualAddendum V00-63-41 .fm

LabMax UserManualAddendum V00-63-41 .fm

LabMax User Manual Addendum Page 10 of 16 ConnectToMeter The ConnectToMeter method connects to the addressed meter if the communication mode is RS-232 or GPIB. If the communication mode is RS-232, it uses the settings as defined by the RS232Settings property. If the communication mode is USB, this…

LabMax UserManualAddendum V00-63-41 .fm

LabMax UserManualAddendum V00-63-41 .fm

LabMax User Manual Addendum Page 5 of 16 GPIB CommunicationMode Valid inputs are 1 to 31. Address 0 is reserved for the GPIB controller-in-charge board. The assigned number must match whatever is currently set in the meter hardware. RS232 CommunicationMode Valid inputs are 1 to 9, depending on which…

LabMax UserManualAddendum V00-63-41 .fm

LabMax UserManualAddendum V00-63-41 .fm

LabMax User Manual Addendum Page 7 of 16 Inputs: iMeterIndex--valid parameter values depend on the communication mode. For more information, refer to "Detailed Reference" on page 4. iRS232Settings--a BSTR holding the serial port settings string, as defined above. Because this property takes an input…

LabMax UserManualAddendum V00-63-41 .fm

LabMax UserManualAddendum V00-63-41 .fm

LabMax User Manual Addendum Page 5 of 16 GPIB CommunicationMode Valid inputs are 1 to 31. Address 0 is reserved for the GPIB controller-in-charge board. The assigned number must match whatever is currently set in the meter hardware. RS232 CommunicationMode Valid inputs are 1 to 9, depending on which…

LabMax UserManualAddendum V00-63-41 .fm

LabMax UserManualAddendum V00-63-41 .fm

LabMax User Manual Addendum Page 7 of 16 Inputs: iMeterIndex--valid parameter values depend on the communication mode. For more information, refer to "Detailed Reference" on page 4. iRS232Settings--a BSTR holding the serial port settings string, as defined above. Because this property takes an input…

LabMax UserManualAddendum V00-63-41 .fm

LabMax UserManualAddendum V00-63-41 .fm

LabMax User Manual Addendum Page 5 of 16 GPIB CommunicationMode Valid inputs are 1 to 31. Address 0 is reserved for the GPIB controller-in-charge board. The assigned number must match whatever is currently set in the meter hardware. RS232 CommunicationMode Valid inputs are 1 to 9, depending on which…

Powered by Site Search powered by SLI Systems

Call 1-800-227-8840


Outside the U.S. 1-408-764-4983

Coherent has locations across the globe that are available to provide support for any product, service or inquiry.

Visit our Contact Page to connect with any of our global sites.


Corporate Headquarters
Coherent Inc.
5100 Patrick Henry Drive
Santa Clara, CA 95054 USA

email: tech.sales@coherent.com

Send Us a Message

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions