Ask a Question
Coherent

Search Results

37 - 48 of 824 Products for 'laser chiller' Page 4 of 69 |

laser chiller

Picosecond laser

Picosecond laser

…etc.). SMC chiller name Heat exchange Required mains voltage Required voltage frequency Cooling capacity HRS024-A-20 water-air 200-230 VAC 50 / 60 Hz 2100 W @ 50 Hz 2400 W @ 60 Hz HRS024-W-20 water-water 200-230 VAC 50 / 60 Hz 2100 W @ 50 Hz 2400 W @ 60 Hz Electrical power for the laser head The…

Picosecond laser

Picosecond laser

…etc.). SMC chiller name Heat exchange Required mains voltage Required voltage frequency Cooling capacity HRS024-A-20 water-air 200-230 VAC 50 / 60 Hz 2100 W @ 50 Hz 2400 W @ 60 Hz HRS024-W-20 water-water 200-230 VAC 50 / 60 Hz 2100 W @ 50 Hz 2400 W @ 60 Hz Electrical power for the laser head The…

Picosecond laser

Picosecond laser

…etc.). SMC chiller name Heat exchange Required mains voltage Required voltage frequency Cooling capacity HRS024-A-20 water-air 200-230 VAC 50 / 60 Hz 2100 W @ 50 Hz 2400 W @ 60 Hz HRS024-W-20 water-water 200-230 VAC 50 / 60 Hz 2100 W @ 50 Hz 2400 W @ 60 Hz Electrical power for the laser head The…

Picosecond laser

Picosecond laser

…external interlock. Opening this chain causes the shutter to close and the laser diodes to deactivate (powering-off). The power supply and the chiller remain active. In case the Interlock is being closed again, the laser diodes remain turned off. A manual switch (off and on) is not necessary. When…

Picosecond laser

Picosecond laser

…external interlock. Opening this chain causes the shutter to close and the laser diodes to deactivate (powering-off). The power supply and the chiller remain active. In case the Interlock is being closed again, the laser diodes remain turned off. A manual switch (off and on) is not necessary. When…

Picosecond laser

Picosecond laser

…external interlock. Opening this chain causes the shutter to close and the laser diodes to deactivate (powering-off). The power supply and the chiller remain active. In case the Interlock is being closed again, the laser diodes remain turned off. A manual switch (off and on) is not necessary. When…

Picosecond laser

Picosecond laser

…exchange. Figure 16: Top view of the power supply Install SMC Filter device Before the SMC chiller can be used it is necessary to install a filter system together with a bypass-channel to the rear side of the chiller. This procedure is valid for SMC-chillers only. Do not hesitate to contact Coherent…

Picosecond laser

Picosecond laser

…to open the filter housing (necessary for filter change during maintenance) 2 Metric M5-screws (necessary to attach the filter-unit to the chiller) 3 Filter assembly with attached mounting-bracket 4 chiller output part 5 chiller return part 6 short thick hose 7 long thin hose 33 of 63 HyperRapid NX

Picosecond laser

Picosecond laser

…exchange. Figure 16: Top view of the power supply Install SMC Filter device Before the SMC chiller can be used it is necessary to install a filter system together with a bypass-channel to the rear side of the chiller. This procedure is valid for SMC-chillers only. Do not hesitate to contact Coherent…

Picosecond laser

Picosecond laser

…to open the filter housing (necessary for filter change during maintenance) 2 Metric M5-screws (necessary to attach the filter-unit to the chiller) 3 Filter assembly with attached mounting-bracket 4 chiller output part 5 chiller return part 6 short thick hose 7 long thin hose 33 of 63 HyperRapid NX

Picosecond laser

Picosecond laser

…exchange. Figure 16: Top view of the power supply Install SMC Filter device Before the SMC chiller can be used it is necessary to install a filter system together with a bypass-channel to the rear side of the chiller. This procedure is valid for SMC-chillers only. Do not hesitate to contact Coherent…

Picosecond laser

Picosecond laser

…to open the filter housing (necessary for filter change during maintenance) 2 Metric M5-screws (necessary to attach the filter-unit to the chiller) 3 Filter assembly with attached mounting-bracket 4 chiller output part 5 chiller return part 6 short thick hose 7 long thin hose 33 of 63 HyperRapid NX

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions