1 - 10 of 374 Search Results for micron
|
|
1.
LaserDiodeTechNote1Rev2
(PAGE 4 OF 8)
|
|
|
... some applications, for instance when a good optical system is being used to focus the laser beam on a working plane to a very small spot only a few microns in size. Because of the astigmatism, the focusing lens cannot truly focus the beam in both the x-z and the y-z planes on the working plane. This ...
|
|
|
|
|
2.
K-Series 10-Micron
|
|
|
K-Series 10-Micron Covers 250 to 500 Watts. Best Price Performance Ratio. K-Series Key Features: Diffusion-cooled Slab technology Single resonator RF and DC power supply Coherent's DIAMOND K-Series sealed off CO 2 lasers are the smallest power-size ratio in the market and are available from 250W ...
|
|
|
|
|
3.
G- and K-Series 9-Micron
|
|
G- and K-Series 9-Micron Designed to Process Materials Like Polyimide, Silicone and Other Plastics. K-Series Applications: Plastic cutting Fabric cutting PCB cutting The DIAMOND CO 2lasers - G-100i and K-225i - are available with 9.4µm wavelength operation. Designed around the same rugged ...
Related Searches: g-100i | g100i | g 100i
|
|
|
|
|
4.
HVP_articleRev2
(PAGE 4 OF 4)
|
|
|
... . Electromagnetic spectrum: Ranges from X-rays to radio waves and beyond, although the optical portion only encompasses the ultraviolet (0.3 to 0.4 microns [µm]), the visible spectrum (0.4 to 0.7 µm) and the infrared (0.7 to 30 µm) Noise: An undesired disturbance in a laser beam that interferes with ...
|
|
|
|
|
5.
2002%20AR
(PAGE 7 OF 93)
|
|
|
and locate defects as small as 0.1 microns, which may not be observable by conventional optical microscopes. These detection systems use advanced image processing and innovative laser scanning technologies to achieve high sensitivity and speed. Detecting the presence of defects is only the first step ...
|
|
|
|
|
6.
Ceramic Scribing with the G-150 laser
|
|
... before being expanded by a 2X Keplerian telescope. The beam was then directed through a 63-mm focal length lens, with a calculated spot size of 75-microns. The cutting head was equipped with a 6.5-mm diameter nozzle. An air pressure of 100 kPa was delivered to the head to reduce lens damage from backspatter ...
Related Searches: scribing | 150
|
|
|
|
|
9.
Micromachining with Industrial Lasers
|
|
... hair. This is an example of high-resolution direct-ablation by mask imaging. This technique can produce resolved features down to a couple of microns. Unique Application Examples for Excimer Laser Microstructuring (click on any of the images above for a larger image) Images courtesy of Laser Laboratorium ...
Related Searches: 266nm | novatube
|
|
Coherent Contact Information