1 - 10 of 51 Search Results for mira shg
|
|
|
3.
Microsoft Word - Mira OPO Whitepaper Formatted rev04a
(PAGE 2 OF 7)
|
|
…of an ultrafast OPO must be set to the exact same length as the Ti:S cavity, i.e. for the same 76 MHz repetition rate in the case of the Mira. Then, every time the signal pulse circulating in the OPO passes through the non-linear crystal, this crystal is pumped by a new pulse…
Related Searches: cw opo
|
|
|
|
|
6.
Microsoft Word - Mira OPO Whitepaper Formatted rev04a
(PAGE 5 OF 7)
|
|
…laser to pump the OPO. (See Figure 7) Black line - V18/Mira-HP Pump Blue line - V10/Mira-900 Pump Red line - V5/Mira-900 Pump All dotted lines represent optional performances Figure 8: Mira OPO SHG ring performance with KTP bulk crystal and with PP crystal. …
|
|
|
|
|
7.
Microsoft Word - Mira OPO Whitepaper Formatted rev04a
(PAGE 5 OF 7)
|
|
…laser to pump the OPO. (See Figure 7) Black line - V18/Mira-HP Pump Blue line - V10/Mira-900 Pump Red line - V5/Mira-900 Pump All dotted lines represent optional performances Figure 8: Mira OPO SHG ring performance with KTP bulk crystal and with PP crystal. …
|
|
|
|
|
8.
Microsoft Word - Mira OPO Whitepaper Formatted rev04a
(PAGE 4 OF 7)
|
|
… is accomplished by first tuning Mira and then shifting the OPO PP crystal to the region with the correct poling to match the new pump wavelength of 900 nm. At 900 nm pump wavelength, Mira OPO can be tuned between 1,170 nm and 1,600 nm SHG/THG Doubling Options A Ti:S system…
Related Searches: mira 900 | opo | mira
|
|
|
|
|
9.
Microsoft Word - Mira OPO Whitepaper Formatted rev04a
(PAGE 4 OF 7)
|
|
… is accomplished by first tuning Mira and then shifting the OPO PP crystal to the region with the correct poling to match the new pump wavelength of 900 nm. At 900 nm pump wavelength, Mira OPO can be tuned between 1,170 nm and 1,600 nm SHG/THG Doubling Options A Ti:S system…
|
|
|
|
|
10.
*Mira 9300 data sheet
(PAGE 2 OF 2)
|
|
…Mira 9300 Specifications Conversion efficiency relative to Mira output power Wavelength Range SHG SHG THG MIRA pump power 8 W 12 W SW, PW, MW 8% 15% 4% LW 4% 10% 2% Specifications apply for specified Mira output parameters. Specifications apply for output at peak of Mira…
Related Searches: mira 9300
|
|