Search Results

1 - 12 of 17 Products for 'mode master' Page 1 of 2 |

mode master

Mode Master White Paper July 2011 final.pdf

Mode Master White Paper July 2011 final.pdf

www.Coherent.com I lmc.sales@coherent.com I (800) 343-4912 I (408) 764-4042 1 White Paper Mode Quality (M2) Measurement Improves Laser Performance The laser mode quality factor (M2) provides a highly useful means of predicting laser beam propagation and focusing characteristics for both laser…

Mode-Master-Whitepaper FORMFIRST.pdf

Mode-Master-Whitepaper FORMFIRST.pdf

www.Coherent.com I lmc.sales@coherent.com I (800) 343-4912 I (408) 764-4042 1 White Paper Mode Quality (M2) Measurement Improves Laser Performance The laser mode quality factor (M2) provides a highly useful means of predicting laser beam propagation and focusing characteristics for both laser…

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

Preinstallation Manual Paladin Advanced Mode Locked UV Laser System

Paladin Advanced Mode Locked UV Laser Preinstallation Manual
2 - 10
Master and slave power supplies have identical dimensions. The slave power supply does not have a display and the
connections in the back differs from the master. See "Section Two: Description and Specifications" on…

Paladin Advanced Preinstallation.book

Paladin Advanced Preinstallation.book

Paladin Mode Locked UV Laser Preinstallation Manual
1 - 10
MASTER
SLAVE
Figure 1-3. Label Locations - Power Supply
2
1
4
3
5 6
2
1
4
3
5 6

ModeMaster PC User Manual

ModeMaster PC User Manual

…to right. The beam
produced by the source (laser) is therefore represented on this
screen as propagating from left to right toward the Mode Master
PC the scan head is located at 0.0 m.
F. Values at cursor's current position. The value is updated
when the cursor is moved left…

EnergyMax-USB/RS User Manual

EnergyMax-USB/RS User Manual

…designate if the device participates in the
trigger bus. The designated mode must match the physical trigger
bus configuration.
Bus Control Position
Gets the trigger bus control position, that is, master or slave.
Command: None
Query: TRIGger:BUS:POSition?
Reply:…

COHR MephistoMOPA DS 0417 2.pdf

COHR MephistoMOPA DS 0417 2.pdf

Mephisto MOPA Datasheet
SPECIFICATIONS Mephisto MOPA
Laser Power at 1064 nm 8, 25, 42, 55
Operational Mode Continuous-wave
Spatial Mode TEM00 (M2 <1.3)
Beam Roundness <1.1
Thermal Tuning Coefficient (GHz/K) -3
Thermal Tuning Range (GHz) 30
Thermal…

mephisto MOPA whitepaper v05.pdf

mephisto MOPA whitepaper v05.pdf

…stable optical lattices.
Output power straight from the NPRO master oscillator is commercially available up to 2W. At
higher powers the laser performance might be compromised by transverse and longitudinal
mode instabilities due to thermal effects. However, the applications discussed…

Photonics Spectra - August 2018

Photonics Spectra - August 2018

…on a
single longitudinal mode. The NPRO naturally favors this single-mode operation
because its short cavity length results in
large frequency spacing between the longitudinal modes, relative to the gain bandwidth of the Nd:YAG crystal. The mode
nearest the peak of the laser…

Photonics Spectra - March 2018

Photonics Spectra - March 2018

…by 50 percent (Figure 1). The pulsing flexibility also supports so-called seeder burst mode -- a group of two to five pulses at full energy and separated by the native repetition rate of the seed laser. This mode is very useful in many industrial applications, especially for thicker substrates. This…

WP1 MephistoNPRO Final.pdf

WP1 MephistoNPRO Final.pdf

…thermal lensing will lead to a reduction in
the spot size of the mode. Ultimately this will result in a
loss of mode matching between pump diode and the
resonator fundamental mode, leading to multitransverse mode oscillation and loss of the main
functionality of the NPRO. From…

EU Photonics Flexible Displays.pdf

EU Photonics Flexible Displays.pdf

…www.coherent.com
saving pulse-on-demand mode. In practice, during laser lift-off processing in a
flexible display fab, the UV laser system
only fires less than 40 % of the machine's
tact time. With the pulse-on-demand
mode, selectable for the excimer laser
the laser…

Powered by Site Search powered by SLI Systems

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions