1 - 10 of 685 Search Results for mount
|
|
|
1.
Mount
|
|
|
Mount The combination of variable-angle mount, confocal design and focusing lens make operation easy. Sales Support: 1-800-343-4912 NEW! Smart Finder Tool Search by Sensors and/or Meters. -- select product type -- Find a Sensor Find a Meter Find a Meter and Sensor For detailed specifications ...
|
|
|
|
2.
Innova300C_fredmotofred_preinstallation
(PAGE 23 OF 32)
|
|
|
... the power supply labelled FROM LASER. 7. Attach the DB25 plug (9) to the connector on the rear of the power supply labelled HEAD CONTROL. Secure the mounting screws on the plug with a screwdriver. 8. Replace the umbilical support bracket. 9. Rotate the umbilical holder so that the umbilical will exit ...
|
|
|
|
|
3.
Mount
|
|
|
Mount The combination of variable-angle mount, confocal design and focusing lens make operation easy. Superior Reliability & Performance Lasers and Laser-based Systems Laser Measurement and Control Precision Optics Related Accessories For detailed specifications, see part number. Part Name Description ...
|
|
|
|
|
4.
HVP_articleRev2
(PAGE 4 OF 4)
|
|
|
... inside internal-drum platesetters favors single-mode sources that emit nondivergent beams with welldistributed energy. External-drum platesetters mount one or more lasers close to the drum's exterior. This helps compensate for the intrinsically poor beam quality of multimode diode lasers used in many ...
|
|
|
|
|
5.
THzLaserforEOWChemSatellite
(PAGE 2 OF 12)
|
|
|
... constructed ultra-highstability and spectral purity FIR lasers which have operated for years with only periodic gas refills, the sealing and mirror mount technologies adopted from the CO2 laser designs are expected to yield FIR lasers which operate for years without refilling or service of any kind ...
|
|
|
|
|
6.
Innova90C_preinstallation
(PAGE 27 OF 32)
|
|
|
Preinstallation Guidelines and Installation Procedure 19 The handles provided for the rack mount option are not intended to be used to carry the power supply if the unit is removed from the rack. 6. Mount the handles to the angles using the #8-32 x 5/8 in. flat head screws. 7. Remove the side screws ...
|
|
|
|
|
7.
LaserCam-HR-UV
|
|
|
... blemish correction CW and Pulsed operation including asynchronous triggering Adjustable trigger delay Variable exposure time 360° Rotational camera mount –convenient and flexible The new LaserCam™-HR-UV camera provides a compact package at an affordable price for beam diagnostic applications from ...
|
|
|
|
|
8.
Verdi_V2-V5-V6_Preinstallation
(PAGE 14 OF 18)
|
|
|
... be clearly marked as the disconnecting device for the laser, and shall be within easy reach of the operator. [3] The passive riser/heat sink must be mounted on a conductive surface capable of maintaining the laser head baseplate at less than 55°C. An optional riser/heat sink and chiller or chill plate ...
|
|
|
|
|
9.
Packaged Bars
|
|
Packaged Bars High-power, 1 cm bars, in standard conduction-cooled platforms. Superior Reliability & Performance Lasers and Laser-based Systems Laser Measurement and Control Precision Optics Related Accessories Coherent's high-power, 1 cm, diode laser bars, are capable of CW powers up to 50 ...
Related Searches: diode bar | water cooled linear array cw bars | laser bars | bar
|
|
|
|
|
10.
THzLaserforEOWChemSatellite
(PAGE 3 OF 12)
|
|
|
... Unit), and the RF power supply and all optical components are located in the lower portion of the housing (ElectroOptic Unit). A radiator plate is mounted to the ElectroOptic unit and radiates the waste heat created by the LLO. The radiator is not structural; in fact the LLO provides the support for ...
|
|
Coherent Contact Information