Ask a Question
Coherent
Search Results
Refine

Result Type

1 - 12 of 70 Products for 'n2 laser' Page 1 of 6 |

n2 laser

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

…Differential (4) 103kPa (15 psi) @ 5.7 lpm (1.5 gpm) Set Temperature Range (at laser head coolant inlet) 21 to 25°C (69.8 to 77°F) Temperature Variation about Set Temperature < ± 1°C (± 1.8°F) LASER PURGE GAS Composition N2 or Clean, Dry Air Flow Rate 2.80 lpm The above specifications subject to…

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

…within the laser head and the RF power module; typically N2 or clean, dry air (CDA) No Purge Gas Filter N/A if using N2; required if using CDA Removes water vapor and particulates from compressed air; see Appendix D: Accessories and Options in the operator's manual. Supplied with laser if purchased.…

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

…Differential (4) 240 kPa (35 psi) @ 9.5 lpm (2.5 gpm) Set Temperature Range (at laser head coolant inlet) 21 to 25°C (69.8 to 77°F) Temperature Variation about Set Temperature < ± 1°C (± 1.8°F) LASER PURGE GAS Composition N2 or Clean, Dry Air Flow Rate 2.80 lpm The above specifications subject to…

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

…Differential (4) 103kPa (15 psi) @ 5.7 lpm (1.5 gpm) Set Temperature Range (at laser head coolant inlet) 21 to 25°C (69.8 to 77°F) Temperature Variation about Set Temperature < ± 1°C (± 1.8°F) LASER PURGE GAS Composition N2 or Clean, Dry Air Flow Rate 2.80 lpm The above specifications subject to…

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

…Differential (4) 240 kPa (35 psi) @ 9.5 lpm (2.5 gpm) Set Temperature Range (at laser head coolant inlet) 21 to 25°C (69.8 to 77°F) Temperature Variation about Set Temperature < ± 1°C (± 1.8°F) LASER PURGE GAS Composition N2 or Clean, Dry Air Flow Rate 2.80 lpm The above specifications subject to…

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

…Differential (4) 103kPa (15 psi) @ 5.7 lpm (1.5 gpm) Set Temperature Range (at laser head coolant inlet) 21 to 25°C (69.8 to 77°F) Temperature Variation about Set Temperature < ± 1°C (± 1.8°F) LASER PURGE GAS Composition N2 or Clean, Dry Air Flow Rate 2.80 lpm The above specifications subject to…

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

…Differential (4) 240 kPa (35 psi) @ 9.5 lpm (2.5 gpm) Set Temperature Range (at laser head coolant inlet) 21 to 25°C (69.8 to 77°F) Temperature Variation about Set Temperature < ± 1°C (± 1.8°F) LASER PURGE GAS Composition N2 or Clean, Dry Air Flow Rate 2.80 lpm The above specifications subject to…

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

…within the laser head and the RF power module; typically N2 or clean, dry air (CDA) No Purge Gas Filter N/A if using N2; required if using CDA Removes water vapor and particulates from compressed air; see Appendix D: Accessories and Options in the operator's manual. Supplied with laser if purchased.…

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

…within the laser head and the RF power module; typically N2 or clean, dry air (CDA) No Purge Gas Filter N/A if using N2; required if using CDA Removes water vapor and particulates from compressed air; see Appendix D: Accessories and Options in the operator's manual. Supplied with laser if purchased.…

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

…within the laser head and the RF power module; typically N2 or clean, dry air (CDA) No Purge Gas Filter N/A if using N2; required if using CDA Removes water vapor and particulates from compressed air; see Appendix D: Accessories and Options in the operator's manual. Supplied with laser if purchased.…

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

DIAMOND J-3 Series OEM Lasers Preinstallation Manual, Rev. AB

…within the laser head and the RF power module; typically N2 or clean, dry air (CDA) No Purge Gas Filter N/A if using N2; required if using CDA Removes water vapor and particulates from compressed air; see Appendix D: Accessories and Options in the operator's manual. Supplied with laser if purchased.…

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

DIAMOND J-5 Series OEM Lasers Preinstallation Manual Rev AA

…within the laser head and the RF power module; typically N2 or clean, dry air (CDA) No Purge Gas Filter N/A if using N2; required if using CDA Removes water vapor and particulates from compressed air; see Appendix D: Accessories and Options in the operator's manual. Supplied with laser if purchased.…

Powered by Site Search powered by SLI Systems

Call 1-800-227-8840


Outside the U.S. 1-408-764-4983

Coherent has locations across the globe that are available to provide support for any product, service or inquiry.

Visit our Contact Page to connect with any of our global sites.


Corporate Headquarters
Coherent Inc.
5100 Patrick Henry Drive
Santa Clara, CA 95054 USA

email: tech.sales@coherent.com

Send Us a Message

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions