1 - 10 of 50 Search Results for nylon
|
|
1.
pdf 127
|
Best match in this PDF
|
All matches in this PDF
|
…optical and photodissociation dynamics studies of various polymeric materials at 157 nm have been investigated [5-7]. In particular, we have used the nylon 6.6 [-NH-(CH2)6-NHCO-(-CH2)4-CO-] as the basic test material, (Fig. 6-7). This material was chosen mainly because its monomer has the potential to be…
Related Searches: compex 205 | wood's horn | wood | compex
|
|
|
|
|
2.
Coherent Inc. Coherent Lasers Advance Microhole Drilling
|
|
|
…programmable. High repetition rates, as produced by a compact excimer laser, ensure the most efficient production throughput. Polyurethane, PET, polyamide, nylon and many other polymer materials can be drilled with high precision using excimer lasers. Predictable maintenance cycles and increased tube lifetime…
|
|
|
|
|
4.
00_E-400_Preinstall.book
(PAGE 37 OF 39)
|
|
…laser head.
Cooling fluid inlet Connection for the 3/8 inch I.D. nylon reinforced PVC cooling fluid hose that
supplies coolant from the coolant source.
Cooling fluid outlet Connection for the 3/8 inch I.D. nylon reinforced PVC cooling fluid hose. Cooling
fluid travels from the laser…
|
|
|
|
|
5.
00_E-400_Preinstall.book
(PAGE 38 OF 39)
|
|
…The recommended hose for cooling fluid consists of a 3/8 inch
(9.5 mm) ID nylon reinforced PVC water hoses for hoses up to
50 feet total. For a water cooling hose over 50 feet, use 1/2 inch
(12.7 mm) ID nylon reinforced PVC water hose.
After connecting the water hoses, verify that…
|
|
|
|
|
6.
00_1000F_Preinstall.book
(PAGE 12 OF 29)
|
|
HighLight 1000F OEM Pre-installation Manual
6
HighLight 1000F is 3/4" ID nylon reinforced PVC water hoses, and
the length of these should not exceed 30 ft (9 m). The inlet and outlet
hose connections are shown in Figure 2.
Purge Gas To maintain non-condensing operation of the…
|
|
|
|
|
7.
Highlights No. 58 V5for PDF.QXP
(PAGE 8 OF 12)
|
|
…A. C. Cefalas, N. Vassilopoulos, Z. Kollia, E.
Sarantopoulou, C. Skordoulis. Mass spectroscopic
studies and ablation characteristics of Nylon 6.6
at 248 nm. Appl. Phys. A 70: 21-28, 2000.
[7] A. C. Cefalas, E. Sarantopoulou, P. Argitis, E.
Sarantopoulou. Mass spectroscopic and…
|
|
|
|
|
8.
00_E-400_Preinstall.book
(PAGE 37 OF 39)
|
|
…laser head.
Cooling fluid inlet Connection for the 3/8 inch I.D. nylon reinforced PVC cooling fluid hose that
supplies coolant from the coolant source.
Cooling fluid outlet Connection for the 3/8 inch I.D. nylon reinforced PVC cooling fluid hose. Cooling
fluid travels from the laser…
|
|
|
|
|
9.
00_E-400_Preinstall.book
(PAGE 38 OF 39)
|
|
…The recommended hose for cooling fluid consists of a 3/8 inch
(9.5 mm) ID nylon reinforced PVC water hoses for hoses up to
50 feet total. For a water cooling hose over 50 feet, use 1/2 inch
(12.7 mm) ID nylon reinforced PVC water hose.
After connecting the water hoses, verify that…
|
|
