---

1.  Laser Ablation ... , the new sample observation microscope is made perfectly co-linear with the laser beam delivery optics through the use of an all-mirror microscope objective, which is free of chromatic aberration. This objective is also able to operate at higher laser power without the risk of coating damage that can ... Related Searches: excimer laser

2.    Coherent-2009_accessible  (PAGE 137 OF 208) ... all errors and all fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits ...

3.  Interferometric Nanostructuring with UV Excimer Lasers ... employed in order to obtain an excimer laser beam with sufficient coherence length. Laser Used: LPXproŽ Series Process: A Schwarzschild projection objective is employed in order to demagnify the UV interference pattern of a 193nm LPXpro laser and achieve a sub-micron (400nm) sized pattern of lines and ... Related Searches: excimer laser

4.  2009 SEUF Conference Abstracts JILA, National Institute of Standards and Technology and University of Colorado The concept of multidimensional spectroscopy originated in NMR where it enabled the det"> 2009 SEUF Conference Abstracts To Locate Your Nearest Coherent Office, click here Superior Reliability & Performance ...

5.    pdf_129 Best match in this PDF  |  All matches in this PDF Very recently we performed the first experiment utilizing velocity map imaging (VELMI) to study the reaction dynamics of the O(1 D) + D2 ---> OD + D system [3]. Despite the advantages of the crossed-beam imaging technique, there have been relatively few such studies'. Almost all have been performed ... Related Searches: lpx | 193 nm laser | lambda physik | edge isolation

6.    ACF487 Best match in this PDF  |  All matches in this PDF ... -drilled hole in a thin-walled plastic is clearly evident in the cross-section of a laserdrilled catheter. Barcodes can be applied to extremely small objects and surfaces such as this catheter, cold marked with a 355-nm laser. Drilling This is an application where lasers really stand out. When looking ... Related Searches: material processing | 200w metal laser tube | nd yag | laser diode array

7.    Coherent-2009  (PAGE 179 OF 208) ... hedged item affects earnings. Ineffective portions of changes in the fair value of cash flow hedges are recognized in other income (expense). Our objective of holding derivatives is to minimize the risks of foreign currency fluctuation by using the most effective methods to eliminate or reduce the impact ...

8.    OLEreprintCOHERENTJul07  (PAGE 2 OF 2) ... fabrication of nanostructures over large sample areas, we have also developed an irradiation setup based on a homemade Schwarzschild-type reflecting objective. This device provides a field size up to 1 mm2, a numerical aperture of at least 0.25 and a demagnification of 15-30. This entire optical setup ...

9.    AR_PSM_2 Best match in this PDF  |  All matches in this PDF ... of a microscope working in transmission mode, it is possible to generate two laterally sheared wave fronts which carry the phase information of the object of interest. The introduced shear depends on the distance between the two Ronchi-phase gratings. A five-phase algorithm can be used to analyze the ...

10.    Coherent_Combo Best match in this PDF  |  All matches in this PDF ... , incoming orders increased 29%, and net income from continuing operations rose to $17.5 million. This performance allowed us to deliver on our key objectives of growth, profitability and cash generation. We are pleased with these results and remain committed to further improvements. The Year in Review ... Related Searches: paul meissner | lumenis | compex 201 | compex 205

---

Search Suggestions: excimer laser | excimer laser ablation

Page 1 2 3 4 5 6 7 8 9 10 11>> of 27 | Next

Site Search by

Coherent Contact Information