... optics. The IX-200 also includes a four-axis motioncontrol system. A video microscope system includes an integrated mounting system for the laser objectivelens, a process-viewing microscope camera with a magnification range from ×40 to ×300, and a high-resolution part inspection and alignment microscope ... Related Searches:schulze | uv lasers | edge isolation | 355nm cw
... beam shines in from the left, passes the homogenizer so that homogenous irradiation of the mask is achieved. The mask is imaged by a demagnifying objective on the substrate or target to be processed. We now select four different positions where the beam path must be monitored: (a) the raw beam, (b) ... Related Searches:beam homogenizer | homogenizer | microlas | lpx pro
... a series of high-resolution, high-contrast images that can be reassembled into a three-dimensional picture. The microscope is confocal because the objectivelens is used both to illuminate the sample and to image it. It is a scanning optical microscope because only one point of the sample is illuminated ... Related Searches:microscopy | fret
DiamondTM GEM, G, & K, Integrator`s Guide 34 divided by the beam diameter for each lens greater than 10 to minimize effects of aberration. Also the same guidelines on acceptable clear apertures and beam diameters given above are still applicable On gantry based systems, the beam expander can be ...
... were kept as constant as possible for the fluorine lasers. A mask imaging system projected de-magnified illumination patterns onto samples with an objectivelens. This method offers well-defined ablation fluences and a potential order of magnitude improvement in resolution (1 - 5 µm) over high intensity ... Related Searches:kr
... modules create a 1 mm circular output beam using MicroBlaze™ patented technology. This is a technique that accurately positions a fiber micro-lens inside the diode laser cap. The micro-lens uniquely corrects the divergence of the fast axis. Once corrected, the beam shape changes from elliptical to ... Related Searches:635nm
Integrator's Guide DiamondTM GEM, G & K Lasers 5100 Patrick Henry Drive Santa Clara, CA 95054 DiamondTM GEM, G, &K Laser Integrator's Guide ii This document is copyrighted with all rights reserved. Under the copyright laws, this document may not be copied in whole or in part or reproduced in ... Related Searches:gem-30 | gem-100l | diamond k-500 | diamond k-250
... beamsplitter that is angle-tuned. The three equal intensity beams is then coupled into a singlemode fibre with a 2-micron core, using a commercial objectivelens and a 3-axis flexure nanopositioning stage. The fibre was custom made by the Photonics CRC at Technology Park. The original idea was that ...
... the highest purity and homogeneity, and therefore also the highest degree of transparency. For this reason, it is especially suitable for optical lenses. Its transmission ability reaches into the ultraviolet spectral range, and therefore it is even particularly appropriate for UV lithography
Related Searches:tunable uv laser | edge isolation | microlens array | kr
... . Figure 1 shows simplified, schematic optical layouts for both recording and playback of this type of transmission hologram. Basically, the scene or object is illuminated with spherical wavefronts from a divergent laser beam. Light reflected from this so-called object beam is combined with light from ... Related Searches:spherical lens | grayscale