1 - 10 of 19 Search Results for optex
|
|
|
1.
AppliedPhysicsRev2.pdf
(PAGE 2 OF 5)
|
|
…
which is favorable for specific medical applications. The Optex laser's spatial beam profile was nearly flat along the long
beam-profile axis and nearly Gaussian along the short beamprofile axis. The spatial appearance of an Optex laser beam
profile with typical dimensions of 4×7 mm2
…
|
|
|
|
|
2.
Paper Title
(PAGE 5 OF 8)
|
|
The 500 Hz solid state switched OPTex Pro series is tailored to meet today's needs of low-duty cycle markets dominated
from an economic viewpoint by the demands of very low investment costs in conjunction with high process flexibility.
These fields of applications comprise medical excimer laser…
|
|
|
|
|
7.
Paper Title
(PAGE 3 OF 8)
|
|
…from duty-cycle variations, the laser tube
temperature is regulated to ± 1°C by a feedback mechanism.
Figure 2: Energy stability of the OPTex Pro at 193 nm and 500 Hz repetition rate over the relative high voltage setting range. Each
data point corresponds to a measurement over 1000 laser…
|
|
|
|
|
8.
untitled
(PAGE 22 OF 136)
|
|
…Fluorescence spectroscopy Innova family
Compass
Sapphire
Radius
Ion
DPSS
OPS
Laser Diode Module
Medical (OEM) OPTex, COMPex
Diode bars
Innova family
Compass
Sapphire
Diamond
Excimer
Semiconductor
Ion
DPSS
OPS
…
|
|
|
|
|
9.
Paper Title
(PAGE 4 OF 8)
|
|
2.2 Laser Beam Parameters
Beam Profile
Measured at 30 cm from the beam exit (near field) the OPTex Pro exhibits the rectangular near-field beam intensity
distribution which is typical for excimer lasers. Along the vertically aligned long axis a top-hat profile is obtained,
whereas…
Related Searches: top hat profile
|
|
|
|
|
10.
Paper Title
(PAGE 8 OF 8)
|
|
…308 nm. The
energy density applied on the paper surface was 600 mJ/cm2
; Courtesy of Fraunhofer IWS, Dresden, Germany
In dermatology OPTEx Pro provides 308 nm output at an energy level of 8 mJ which has been found to be appropriate
for excimer laser systems used for treatment of skin…
|
|
