1 - 7 of 7 Search Results for optex pro
|
|
|
2.
Paper Title
(PAGE 3 OF 8)
|
|
…from duty-cycle variations, the laser tube
temperature is regulated to ± 1°C by a feedback mechanism.
Figure 2: Energy stability of the OPTex Pro at 193 nm and 500 Hz repetition rate over the relative high voltage setting range. Each
data point corresponds to a measurement over 1000 laser…
|
|
|
|
|
3.
Paper Title
(PAGE 4 OF 8)
|
|
2.2 Laser Beam Parameters
Beam Profile
Measured at 30 cm from the beam exit (near field) the OPTex Pro exhibits the rectangular near-field beam intensity
distribution which is typical for excimer lasers. Along the vertically aligned long axis a top-hat profile is obtained,
whereas…
Related Searches: top hat profile
|
|
|
|
|
4.
Paper Title
(PAGE 8 OF 8)
|
|
…nm. The
energy density applied on the paper surface was 600 mJ/cm2
; Courtesy of Fraunhofer IWS, Dresden, Germany
In dermatology OPTEx Pro provides 308 nm output at an energy level of 8 mJ which has been found to be appropriate
for excimer laser systems used for treatment of skin…
|
|
|
|
|
5.
Paper Title
(PAGE 5 OF 8)
|
|
The 500 Hz solid state switched OPTex Pro series is tailored to meet today's needs of low-duty cycle markets dominated
from an economic viewpoint by the demands of very low investment costs in conjunction with high process flexibility.
These fields of applications comprise medical excimer laser…
|
|
|
|
|
6.
Paper Title
(PAGE 2 OF 8)
|
|
…energy, solid state pulsed excimer laser OPTex Pro is
discussed.
2.1 Output Performance
Energy Stability
Employing proven NovaTube®
metal-ceramic technology as well as optimized gas flow dynamics and discharge
geometry the OPTex Pro excimer laser has been designed to deliver…
Related Searches: thyratron | thyratron switch
|
|
|
|
|
7.
Paper Title
(PAGE 7 OF 8)
|
|
…LASIK-flap. Against this
background, OPTex Pro based scanning spot systems working at 500 Hz are the enabling tool to smaller laser spot
diameters on the cornea with reduced treatment times. Higher repetition rate excimer lasers based on the OPTex Pro
working at 500 Hz are the next step…
Related Searches: beam homogenizer
|
|
